مقطورة نصف قلابةKEMPF
3-achs 39m³ ALU- Halbschalenmulde, 5,2 to LG.
مقطورة نصف قلابة
KEMPF
3-achs 39m³ ALU- Halbschalenmulde, 5,2 to LG.
سعر ثابت دون ضريبة القيمة المضافة
28.500 €
(33.915 € إجمالي)
سنة الصنع
2019
الحالة
مستعمل
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
28.500 €
(33.915 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 29.780 كجم
- الوزن الإجمالي:
- 35.000 كجم
- تكوين المحور:
- 3 محاور
- التسجيل الأول:
- 10/2019
- الفحص القادم (TÜV):
- 09/2026
- طول مساحة التحميل:
- 8.700 مم
- عرض مساحة التحميل:
- 2.300 مم
- ارتفاع مساحة التحميل:
- 2.100 مم
- حجم مساحة التحميل:
- 39 م³
تفاصيل العرض
- معرّف القائمة:
- A210-75-672
- الرقم المرجعي:
- 6321
- التحديث الأخير:
- في ٢٧.٠١.٢٠٢٦
الوصف
Braking system:
* Knorr EBS with RSS (electronic braking system with Roll Stability Support)
* Emergency release device for spring-loaded cylinders
* Disc brakes with 430 mm disc diameter
---- Axles:
* 3 x 9 ton SAF axles
* 1st axle liftable (fully automatic and as traction aid)
---- Suspension:
* Air suspension with lifting and lowering system
---- Electrical / Lighting:
* Knorr trailer information module
* 15-pin power connector
* Additional combination taillight (reversing light & rear fog light)
* 2 additional LED reversing lights
* 1 LED work light on each side (left and right) in the area of the landing gear
---- General attachments:
* Aluminum air tank
* BPW crank landing legs
* Folding aluminum underrun protection
* 2 towing eyes mounted at the rear frame end
* Enclosed single plastic fenders
* 2 plastic toolboxes on the left side, approx. 660 x 500 x 460 mm
* 30 l plastic water tank with drain tap on the right side
* Side underrun protection mounted only on the right
* 3.8 m aluminum access ladder stored on the right side above the fender
* Folding "A" sign at the rear
* Access steps and standing platform in front of the front wall
* Shovel and broom holder outside, right side of the front wall
---- Tires:
* Alcoa Dura-Bright aluminum rims
---- Chassis:
* Chassis made of high-grade fine-grain steels (tapered towards the front)
---- Tipping body:
* Aluminum half-shell rear tipper body made of wear-resistant aluminum alloys
* Front wall and tailgate inclined at 20°
* Top rails made of strong aluminum profiles
* Front wall thickness: 5 mm
* Side wall thickness: 5 mm, higher towards the rear
* Tailgate: 5 mm thick with reinforcing profiles, mounted with double-joint bearing and replaceable rubber seal
* Automatic 2-hook locking system including 2 locking pins with holder
* 2 mechanical additional locks on the left and right sides
* Floor thickness: 8 mm
* Load pressure gauge fitted front left
* 1x air vibrator with oiler under the floor, operable via switch at rear left
---- Hydraulics:
* Front hydraulic cylinder/stem, working pressure 190 to 250 bar
---- Rolling tarp:
* Grey rolling tarp
---- Loading volume:
* Approx. 38.5 m³
---- Saddle height:
* Approx. 1,200 mm when loaded
---- Paint finish:
* Tipper body in cherry red
* Chassis in dark grey
---- Information:
* --Technical gross weight possible: 38,000 kg--
* Errors and prior sale reserved
Podpfx Aoydg A Eeh Ijgg
---- Delivery time:
* Available immediately
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Knorr EBS with RSS (electronic braking system with Roll Stability Support)
* Emergency release device for spring-loaded cylinders
* Disc brakes with 430 mm disc diameter
---- Axles:
* 3 x 9 ton SAF axles
* 1st axle liftable (fully automatic and as traction aid)
---- Suspension:
* Air suspension with lifting and lowering system
---- Electrical / Lighting:
* Knorr trailer information module
* 15-pin power connector
* Additional combination taillight (reversing light & rear fog light)
* 2 additional LED reversing lights
* 1 LED work light on each side (left and right) in the area of the landing gear
---- General attachments:
* Aluminum air tank
* BPW crank landing legs
* Folding aluminum underrun protection
* 2 towing eyes mounted at the rear frame end
* Enclosed single plastic fenders
* 2 plastic toolboxes on the left side, approx. 660 x 500 x 460 mm
* 30 l plastic water tank with drain tap on the right side
* Side underrun protection mounted only on the right
* 3.8 m aluminum access ladder stored on the right side above the fender
* Folding "A" sign at the rear
* Access steps and standing platform in front of the front wall
* Shovel and broom holder outside, right side of the front wall
---- Tires:
* Alcoa Dura-Bright aluminum rims
---- Chassis:
* Chassis made of high-grade fine-grain steels (tapered towards the front)
---- Tipping body:
* Aluminum half-shell rear tipper body made of wear-resistant aluminum alloys
* Front wall and tailgate inclined at 20°
* Top rails made of strong aluminum profiles
* Front wall thickness: 5 mm
* Side wall thickness: 5 mm, higher towards the rear
* Tailgate: 5 mm thick with reinforcing profiles, mounted with double-joint bearing and replaceable rubber seal
* Automatic 2-hook locking system including 2 locking pins with holder
* 2 mechanical additional locks on the left and right sides
* Floor thickness: 8 mm
* Load pressure gauge fitted front left
* 1x air vibrator with oiler under the floor, operable via switch at rear left
---- Hydraulics:
* Front hydraulic cylinder/stem, working pressure 190 to 250 bar
---- Rolling tarp:
* Grey rolling tarp
---- Loading volume:
* Approx. 38.5 m³
---- Saddle height:
* Approx. 1,200 mm when loaded
---- Paint finish:
* Tipper body in cherry red
* Chassis in dark grey
---- Information:
* --Technical gross weight possible: 38,000 kg--
* Errors and prior sale reserved
Podpfx Aoydg A Eeh Ijgg
---- Delivery time:
* Available immediately
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ
































