مقطورة نصفية مفتوحة مع قماش مشمع

KÖGEL S24-1*Volumen* LiftA*Hubdach*7 x vorhanden

VIN: WKOS0002400300636

Permissible fifth wheel load: 12,000 kg
Permissible axle group load: 24,000 kg (8,000 kg per axle)
Technically possible axle group load: approx. 27,000 kg (9,000 kg per axle)
Kjdpjycphzsfx Acyewt
Permissible gross weight: 39,000 kg
Technically possible gross weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with a test axle load of 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle distance: approx. 1,310 mm
(A2) Axle distance: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading platform length (internal): approx. 13,620 mm
(G) Loading platform width (internal): approx. 2,480 mm
(G2) Rear loading width: approx. 2,480 mm
(H1) Unladen loading height in level driving position: approx. 1,030 mm
(H2) Laden loading height in level driving position: approx. 1,000 mm
(H3) Achievable ramp height at rear of the vehicle with fifth wheel height at 910 mm, laden, raised: approx. 1,190 mm
Ride height set at 265 mm.
(K) Internal side loading height: front approx. 2,735 mm - approx. 2,860 mm [adjustable in 5x25 mm steps], rear approx. 2,810-2,860 mm [adjustable in 1x50 mm step]
(K1) Internal height under roof: front approx. 2,875 mm - approx. 3,000 mm [adjustable in 5x25 mm steps] | rear approx. 2,950 mm - approx. 3,000 mm [adjustable in 1x50 mm step]
(X1) Total height unladen in level driving position: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- height adjustment
Body adjustments: The structural design of the "Mega" body enables a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, internal side loading height, internal height) change according to the chosen body setting.
(T) Roof construction height (side): approx. 180 mm. Due to the design of the roof beam, the internal height at pallet width matches the stated internal height under the roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
(P) Construction height above fifth wheel: approx. 90 mm
(S) Possible fifth wheel height unladen: approx. 940 - 1,070 mm, sits level at approx. 940 mm (observe total height!)

Chassis
Standard ladder frame in lightweight steel with through-cross members.
Cover plate between outer frame and longitudinal member as wheel guard for the tractor unit's rear wheels.
8 mm thick coupling plate with a 2" kingpin according to DIN 74080/ISO 337

Running Gear
Axle lift on axle 1
Axle lift control fully automatic, load-dependent. Start aid: Activate by pressing the brake 3 times, 30% overload up to a speed of 25 km/h.
Three-axle SAF INTRADISC unit with disc brakes Ø 370 mm, ET 120.
Air suspension with 260 mm lift

Chassis Attachments
JOST landing legs, mechanical with compensation foot, 24 t lifting capacity. Single-sided operation, right in direction of travel.
Side guard according to ECE-R73
2 large plastic toolboxes, waterproof, dimensions (internal) approx. 923 x 422 x 460 mm. Installed at the rear, 1x left and 1x right.
Retractable access ladder, rear right.
Low, rigid rear underrun protection made of steel according to ECE-R58
Height of underrun protection profile min. 120 mm, designed for increased test forces.

Brake/Air Suspension System
WABCO EBS system
Air suspension system incl. 1 lift and lower valve, mounted on the left in direction of travel

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.