شبه مقطورة بمنصة عمل

FAYMONVILLE MAX Trailer MAX200 Telesattel Bordwände

You can find our entire stock of vehicles, including those available immediately or at short notice, on our website.

Excerpt of equipment features. Full specification available upon request.

Loading platform:
* Extendable loading platform with pneumatically operated locking mechanism
* Loading platform approx. 30 mm thick timber flooring, set in Omega profiles
* 10 pairs of folding lashing rings (LC 2,500 daN)
* 7 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* Loading width approx. 2,480 mm

Landing legs:
* JOST mechanical landing legs with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t)

Axles:
* BPW air-suspended axles with disc brakes (approx. 430 mm), with lift/lower function (ET 120)
* Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually
* Axle toolkit

Tyres:
* 385/65 R 22.5 tyres

Brake system:
* Brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit

Paintwork:
* Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
* High-quality single-colour 2-component (2K) top coat in RAL 3002 carmine red
* Rear section metallised and coated in RAL 9010 (pure white)

Including the following additional equipment:
* Yellow-red air couplings at the galvanised front connection rail
* 2" king pin
* Yellow reflective tape to EU regulations, fitted to sides, extension and rear of trailer
* European reflective warning boards (red-yellow) at the rear of the trailer
* Loading platform approx. 30 mm thick timber flooring, set in Omega profiles
* Holder for approximately 1,000 mm long stakes, mounted at rear central beam
* 1 spare wheel holder under the loading platform, left side
* Bracket for rotating beacon at the rear of the trailer
* At the gooseneck and rear panel left and right, each with a bracket for warning signs including socket
* Load pressure gauge for axle load determination including load diagram
* Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high
* Folding aluminium side boards with rear double-wing doors (anodised), on the sides of the loading platform, approx. 600 mm high, with KINNEGRIP folding posts
* Holder for aluminium side boards, mounted under the platform before the axles
* Holder for KINNEGRIP posts, under the platform behind the axles
* 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, fitted to the outer frame of the platform
* Rear underrun protection, left and right on the rear traverses
* 6 pairs of WADER container locks in the platform, for 1x 20' container, 2x 20' containers or 1x 40' container
* 1 INOX toolbox, approx. 600 x 350 x 600 mm, fitted under the platform left side
Dkodjya Shlopfx Ab Hoi
* 4 pairs of stake pocket strips fitted longitudinally on the loading platform, for plug-in stakes 100 x 50 mm
* Lifting axle on the front axle, controlled by TEBS E in line with current axle load and loading condition
* On the warning boards, holder for beacon
* Acoustic reverse warning signal
* 2 LED reversing lights mounted on rear panel
* HRM (High Resistance Metallisation) metallisation of outer frame

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.