مقطورة منخفضة التحميلMÜLLER-MITTELTAL
ETÜTAR 14,4 Plateau, LED, Runduml.
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
ETÜTAR 14,4 Plateau, LED, Runduml.
سعر ثابت دون ضريبة القيمة المضافة
26.490 €
(31.523 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Alsdorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
26.490 €
(31.523 € إجمالي)
- موقع البائع:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.950 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- معدات:
- رافعة خلفية, نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف القائمة:
- A209-75-292
- التحديث الأخير:
- في ١٧.٠١.٢٠٢٦
الوصف
Müller-Mitteltal ETÜ-TA-R 14.4 Tandem ? Low Loader ? Platform ? Trailer
Hnedpfx Adsyadz Ro Aog
Available at the end of February ’26 | Ref. No. for inquiries: 27678 | Free delivery to your address possible
* We are happy to provide you with an individual offer
* ----
* Gross weight: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27 m x 2.47 m platform with galvanized front wall, 400 mm high
* Hardwood excavator bucket rest bolted to the front wall
* Deck height unladen 930 mm / laden 870 mm
* One-piece ramps with hot-galvanized grating, anti-slip design, extendable to approx. 20 mm, secured by support rods and diagonal bracing
* Ramp lifter with vertically mounted, adjustable springs for easy single-person operation
* 4 UVV drop lashing rings (LC 6300 daN)
* Perforated outer frame (45° bent with hole pattern for lashing equipment, lashing force per point LC 2000 daN, min. spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with closely spaced cross-members, high-profile front and rear ends, rear incline, hot-galvanized
* 10 UVV flush-mount lashing rings LC 3000 daN can be recessed into existing hole pattern in the outer frame, in addition
* Additional lashing points via holes (Ø 50 mm, LC 1200 daN) in front and end crossmembers
* Toolbox in front of the bulkhead
* Side marker lights with indicator function
* 50 mm thick softwood floor. Chassis hot-galvanized
* 2 recessed container locks in front crossmember
* Height-adjustable support winch at front, drop-down supports at rear
* Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, optionally available with 50 mm towing eye
* 1 removable LED beacon at the rear----
* Leasing, hire purchase, financing, trade-in possible
* e.g. €515 per month with 60 months term – no down payment, no residual value
* ----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside these hours, we are available by appointment.
We speak German, English, Polish, and French.
Leasing, financing, and trade-in available.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Hnedpfx Adsyadz Ro Aog
Available at the end of February ’26 | Ref. No. for inquiries: 27678 | Free delivery to your address possible
* We are happy to provide you with an individual offer
* ----
* Gross weight: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27 m x 2.47 m platform with galvanized front wall, 400 mm high
* Hardwood excavator bucket rest bolted to the front wall
* Deck height unladen 930 mm / laden 870 mm
* One-piece ramps with hot-galvanized grating, anti-slip design, extendable to approx. 20 mm, secured by support rods and diagonal bracing
* Ramp lifter with vertically mounted, adjustable springs for easy single-person operation
* 4 UVV drop lashing rings (LC 6300 daN)
* Perforated outer frame (45° bent with hole pattern for lashing equipment, lashing force per point LC 2000 daN, min. spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with closely spaced cross-members, high-profile front and rear ends, rear incline, hot-galvanized
* 10 UVV flush-mount lashing rings LC 3000 daN can be recessed into existing hole pattern in the outer frame, in addition
* Additional lashing points via holes (Ø 50 mm, LC 1200 daN) in front and end crossmembers
* Toolbox in front of the bulkhead
* Side marker lights with indicator function
* 50 mm thick softwood floor. Chassis hot-galvanized
* 2 recessed container locks in front crossmember
* Height-adjustable support winch at front, drop-down supports at rear
* Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, optionally available with 50 mm towing eye
* 1 removable LED beacon at the rear----
* Leasing, hire purchase, financing, trade-in possible
* e.g. €515 per month with 60 months term – no down payment, no residual value
* ----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside these hours, we are available by appointment.
We speak German, English, Polish, and French.
Leasing, financing, and trade-in available.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 2404 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Alsdorf
2.388 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTALETÜTAR 14,4 Plateau, LED, Runduml.
MÜLLER-MITTELTALETÜTAR 14,4 Plateau, LED, Runduml.
تم حذف إعلانك بنجاح
حدث خطأ














































