مقطورة نصف منخفضة

FAYMONVILLE Megamax Tiefbett 2x12 t PA

You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website.

Excerpt from the equipment list. Complete equipment available upon request.

Gooseneck:
* Gooseneck in SNT design to optimize the loading area length, approximately 3,750 mm long, hydraulically extendable/retractable and adjustable.
* Technical saddle load: 25,000 kg
* For semi-trailer tractor: 4 x 2, 6 x 2, and 6 x 4

Low-bed:
* Low-bed designed as a telescoping bolster bridge in a low-profile design with an extension at the front and a mechanical locking mechanism.
* Length x width approximately 6,850 mm x 2,540 mm
* The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length.

Axles and Suspension:
* PENDEL-AXLE
* All axles are hydro-mechanically force-steered.
* Hose burst valve on the axle equalization system.
* Cylinders with automatic RESET function.
* Hydraulic cylinders with shut-off valves and a connector for securing in the raised position.
* Technical axle load: 12,000 kg each.
* Hydraulic axle equalization.
* Tires: 245/70 R 17.5
* Rear chassis: rear chassis with a closed outer frame, with a diamond-plate cover and a continuous prismatic excavator well, approximately 1,250/700 x 505 mm, open at the rear.

Braking System:
* Braking system from WABCO EBS-E, in accordance with EU regulations, without a connecting cable to the semi-trailer tractor.

Paintwork:
* Color of the semi-trailer: RAL 3002 carmine red.

Included Accessories:
* Steel front wall, plug-in, approximately 400 mm high.
* 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches, without installation of the supply connections on the semi-trailer tractor.
* Outer beam of the gooseneck with mounting holes for screw-on lashing rings. The first hole is approximately 200 mm from the front, then every approximately 400 mm. 2 pairs of screw-on lashing rings included (LC 5,000 daN).
* 1 lashing ring on the left and right sides on the rear slope of the gooseneck (LC 6,000 daN).
* 2-inch kingpin.
* One locking point every approximately 500 mm on the extension.
* 1 pair of steel ramps with climbing strips and fastening bolts for bridging the mounting hooks of the low-bed.
* 1 lashing ring on the left and right sides on the front cross member (LC 10,000 daN).
Bodpfx Aisx Uvlloqown
* Lashing rings with retaining spring every approximately 1,200 - 1,300 mm on the outside of the inner beams of the loading area.
* Lashing rings with retaining spring every approximately 1,200 - 1,300 mm on the outside of the outer beams of the loading area (LC 10,000 daN) on the upper chord of the outer beams.
* Recesses above the lashing rings.
* 1 lashing ring hanging on the outside on the left and right sides on the rear cross member (LC 10,000 daN) on the outer beams of the loading area.
* Preparation for the removable loading floor.
* Mounting rail at the front of the rear chassis for the low-bed for loose loading ramps.
* Chassis with beveled corners at the rear.
* Mounting rail for loose aluminum loading ramps on the end cross member of the vehicle.
* Steerable from the front and rear via cable remote control with push buttons, with single-axle control, without installation in the semi-trailer tractor.
* Mechanical pin-tab coupling from the low-bed to the chassis, for changing the loading area or installing extension beams, with electric-pneumatic-hydraulic couplings.
* Round NATO socket

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.