آلة زراعيةKugelmann
KG-D301
آلة زراعية
Kugelmann
KG-D301
سعر ثابت دون ضريبة القيمة المضافة
11.000 €
(13.090 € إجمالي)
سنة الصنع
2024
الحالة
مستعمل
الموقع
Prüm 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
11.000 €
(13.090 € إجمالي)
- موقع البائع:
- Rudolf-Diesel-Str. 6 (Gewerbegebiet), 54595 Prüm, ألمانيا

اتصل
تفاصيل فنية
- وزن فارغ:
- 178 كجم
تفاصيل العرض
- معرّف القائمة:
- A209-04-337
- الرقم المرجعي:
- 49196-13907
- التحديث الأخير:
- في ١٠.٠١.٢٠٢٦
الوصف
Dreipunktstreuer D301 0.3m³
Description:
Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation.
Features:
- Hydraulically driven single-chamber spreader with auger and spreading disc
- Corrosion-resistant combination of stainless steel subframe and plastic hopper
- Dimensions (WxDxH): 1080 x 590 x 1200 mm
- Unladen weight: 178 kg
- Includes apron/splash guard
- Includes tarpaulin cover
- Includes road lighting (compliant with StVZO)
- RAL 2011 signal color
- Manual emergency operation
- Foldable support legs
- Low energy consumption
- Operable from an oil flow rate of 15 l/min
- Patented spreading disc unit
- Manual adjustment of spreading pattern
- Winter service marked with reflective white warning film
- Can be operated without control unit (via control cabinet key on easily accessible side)
- Mounting for CAT 1
Standard Equipment:
- Hydraulic drive for auger and spreading disc
- Stainless steel (VA) subframe with RAL 2011 signal paint
- Stainless steel spreading disc
- Plastic spreading hopper
- Plastic spreading disc guard
- Mesh tarpaulin cover
Fedpfxex S Tpvs Ac Esft
- Apron
- LED lighting in accordance with StVZO
- Foldable support legs (remain on device during use)
- Manual adjustment of spreading pattern
- Winter service marking
- Operation possible without control unit
- All drives are regulated and equipped with manual emergency operation
- Hydraulic hoses with SVK couplings for forward and return
- Spreader is fully storable (can be set down)
Carrier Vehicle Requirements:
- min. 20 L/min at reduced spreading output
- max. 50 L/min with external oil cooler
- Kugelmann system internally rated at 230 bar
- Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight
Optional Equipment:
- k-basic 2 control unit
- Wiring harness (flying)
- Microprocessor control with CAN-BUS technology
- Closed loop control of all drives (with feedback)
- Functions:
> Adjust spreading width
> Adjust spreading density
> Rotating beacon on/off
> Work light on/off
> Spreader operating/pause
> Illuminated keys and rotary controls
> Data recording
> Speed simulation
> x2 key for travel-dependent spreading (compatible with k-basic 2)
- Option: Travel-dependent spreading incl. start/stop function – driving signal required
- LED work light 12V
Storage location: not specified
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Description:
Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation.
Features:
- Hydraulically driven single-chamber spreader with auger and spreading disc
- Corrosion-resistant combination of stainless steel subframe and plastic hopper
- Dimensions (WxDxH): 1080 x 590 x 1200 mm
- Unladen weight: 178 kg
- Includes apron/splash guard
- Includes tarpaulin cover
- Includes road lighting (compliant with StVZO)
- RAL 2011 signal color
- Manual emergency operation
- Foldable support legs
- Low energy consumption
- Operable from an oil flow rate of 15 l/min
- Patented spreading disc unit
- Manual adjustment of spreading pattern
- Winter service marked with reflective white warning film
- Can be operated without control unit (via control cabinet key on easily accessible side)
- Mounting for CAT 1
Standard Equipment:
- Hydraulic drive for auger and spreading disc
- Stainless steel (VA) subframe with RAL 2011 signal paint
- Stainless steel spreading disc
- Plastic spreading hopper
- Plastic spreading disc guard
- Mesh tarpaulin cover
Fedpfxex S Tpvs Ac Esft
- Apron
- LED lighting in accordance with StVZO
- Foldable support legs (remain on device during use)
- Manual adjustment of spreading pattern
- Winter service marking
- Operation possible without control unit
- All drives are regulated and equipped with manual emergency operation
- Hydraulic hoses with SVK couplings for forward and return
- Spreader is fully storable (can be set down)
Carrier Vehicle Requirements:
- min. 20 L/min at reduced spreading output
- max. 50 L/min with external oil cooler
- Kugelmann system internally rated at 230 bar
- Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight
Optional Equipment:
- k-basic 2 control unit
- Wiring harness (flying)
- Microprocessor control with CAN-BUS technology
- Closed loop control of all drives (with feedback)
- Functions:
> Adjust spreading width
> Adjust spreading density
> Rotating beacon on/off
> Work light on/off
> Spreader operating/pause
> Illuminated keys and rotary controls
> Data recording
> Speed simulation
> x2 key for travel-dependent spreading (compatible with k-basic 2)
- Option: Travel-dependent spreading incl. start/stop function – driving signal required
- LED work light 12V
Storage location: not specified
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2017
تقديم الطلب
الهاتف & فاكس
+49 6551 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ






