شاحنة قلابةVolvo
FM D13460 6x2 2S-Kipper, PK24001 SLD
شاحنة قلابة
Volvo
FM D13460 6x2 2S-Kipper, PK24001 SLD
الحالة
جديد
الموقع
Gralla 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
- موقع البائع:
- Gewerbepark Nord 1, 8431 Gralla, النمسا

اتصل
تفاصيل فنية
- عدد الكيلومترات المقطوعة:
- 327 كم
- قدرة:
- 345 كيلوواط (469,07 حصان)
- نوع الوقود:
- ديزل
- وزن فارغ:
- 15.465 كجم
- الوزن الأقصى للحمولة:
- 10.535 كجم
- الوزن الإجمالي:
- 26.000 كجم
- تكوين المحور:
- 6x2
- قاعدة العجلات:
- 5.200 مم
- استهلاك الوقود (داخل المدينة):
- 1.018 لتر/100 كم
- لون:
- أبيض
- كابينة السائق:
- كابينة نوم
- نوع التروس:
- تلقائي
- تعليق:
- فولاذ-هواء
- عدد المقاعد:
- 2
- الطول الكلي:
- 10.185 مم
- حجم مساحة التحميل:
- 13 م³
- طول مساحة التحميل:
- 6.200 مم
- عرض مساحة التحميل:
- 2.450 مم
- ارتفاع مساحة التحميل:
- 900 مم
- ارتفاع الرفع:
- 4.000 مم
تفاصيل العرض
- معرّف القائمة:
- A208-22-487
- الرقم المرجعي:
- 69156x423784x01
- التحديث الأخير:
- في ٢٣.١٢.٢٠٢٥
الوصف
Body manufacturer: Hirschmugl, empty weight: 15465kg, permissible total weight: 26000kg, loading space (L W H): 6200 mm x 2450 mm x 900 mm, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 385/65 R22.5, fabric seats, interior color gray, leaf air suspension, TWO-SIDE TIPPER ZSK - 3 for 3-axle trucks up to 26 tonnes total weight Superstructure: - Tipper bridge inside length approx. 6200 mm, inside width approx. 2450 mm, for container transport - Floor abrasion-resistant fine-grain steel HARDOX 5mm, in one piece, including tight-ribbed floor reinforcement welded to the tipper frame, including lashing eyes sunk into the floor welded in, as required - Tipper frame, shaped tube frame with stable shaped tube press bearings, rear and front boom, shaped tube, frame connected to the truck chassis by means of sliding brackets - Front wall made of steel, including load carrier for long goods transport, - Side walls, height 900mm, made of VS40 aluminum hollow profile, with 20mm aluminum edging, foldable and swingable, with galvanized hinge bearings, including side wall lifting aids, including 8 lashing eyes, recessed - Rear wall, height 900mm, made of steel, permanently welded to the tipper platform, with 2 lashing eyes, recessed welded in, including load carrier, extendable - Central lock for side wall, pneumatically operated from the driver's cab - BW lock, Hirschmugl camshaft locks, adjustable General: - Truck auxiliary frame with stabilization plate for high stability of the tipper - Assembly using sliding brackets and clamping brackets - Rear tipper carrier (maintenance-free) integrated in the subframe - Plug pins cannot be mixed up - Rear lights built into light protection - PVC mudguards, including mud flaps (supplied by the vehicle manufacturer) - Bracket for wheel chock - 2 stainless steel tool boxes - Fixed underrun protection - Pallet fork holder in the rear area - Hydraulic system type: - Multi-stage tipping cylinder with cardanic bearing and automatic shutdown - High pressure pump 60Ltr. Continuous operation suitable for cranes
Lhodpfox Nrr Djx Abnsr
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Lhodpfox Nrr Djx Abnsr
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2006
تقديم الطلب
الهاتف & فاكس
+43 3452 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ






























