مقطورة مع منصة عملMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Federrampe
سعر ثابت دون ضريبة القيمة المضافة
42.500 €
(50.575 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
42.500 €
(50.575 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 23.830 كجم
- الوزن الإجمالي:
- 30.000 كجم
- تكوين المحور:
- 3 محاور
- طول مساحة التحميل:
- 8.460 مم
- عرض مساحة التحميل:
- 2.520 مم
تفاصيل العرض
- معرّف القائمة:
- A207-87-227
- الرقم المرجعي:
- 6316
- التحديث الأخير:
- في ١٨.١٢.٢٠٢٥
الوصف
* T3 Profile 30.0:
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
Ibjdpfxjx Ipa No Abnof
* Parabolic springs
* Mechanical rear axle equalizer
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with splash protection
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage electrical system
* LED rear lights
* Removable rotating beacon at the rear
* Tow bar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle
* 15-pin electrical plug
* 4 stake pockets per side (no stakes present), can also be used as lashing points
* Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs UVV swivel and lowerable lashing rings, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t.
* 6 pairs mechanical folding outriggers for 3 m overall width (not included in the rear slope)
* Widening planks stored in the center of the loading area
* Dipper stick tray over the rear axle up to the end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the dipper stick tray)
* Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm)
* Mechanical lateral ramp shift
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach slope)
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, etc., painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technically permissible total weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 12/2026
* Sample image
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* EBS braking system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
Ibjdpfxjx Ipa No Abnof
* Parabolic springs
* Mechanical rear axle equalizer
* Side underrun protection
* Swing-down supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle with closed plastic mudguards and rear axle with straight galvanized steel skirts, each with splash protection
* Reflective contour tape on sides and rear
* Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage electrical system
* LED rear lights
* Removable rotating beacon at the rear
* Tow bar with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle
* 15-pin electrical plug
* 4 stake pockets per side (no stakes present), can also be used as lashing points
* Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs UVV swivel and lowerable lashing rings, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t.
* 6 pairs mechanical folding outriggers for 3 m overall width (not included in the rear slope)
* Widening planks stored in the center of the loading area
* Dipper stick tray over the rear axle up to the end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the dipper stick tray)
* Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm)
* Mechanical lateral ramp shift
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach slope)
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, etc., painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Technically permissible total weight of 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 12/2026
* Sample image
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ




