مقطورة نصف منخفضةFliegl
SDS 390, Nachlauflenkung, 2x VORHANDEN!
مقطورة نصف منخفضة
Fliegl
SDS 390, Nachlauflenkung, 2x VORHANDEN!
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
24.900 €
(29.631 € إجمالي)
الحالة
مستعمل
الموقع
Bovenden 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
24.900 €
(29.631 € إجمالي)
- موقع البائع:
- Alte Bundesstraße 48, 37120 Bovenden, ألمانيا

اتصل
تفاصيل فنية
- وزن فارغ:
- 6.990 كجم
- الوزن الأقصى للحمولة:
- 28.010 كجم
- الوزن الإجمالي:
- 35.000 كجم
- تكوين المحور:
- 3 محاور
- التسجيل الأول:
- 01/2021
- الفحص القادم (TÜV):
- 12/2026
- طول مساحة التحميل:
- 10.000 مم
- عرض مساحة التحميل:
- 2.500 مم
- ارتفاع مساحة التحميل:
- 1 مم
- تعليق:
- هواء
- مقاس الإطار:
- 235/75R17.5
- لون:
- أبيض
- عدد الكيلومترات المقطوعة:
- 1.001 كم
- نوع التروس:
- آخر
- كابينة السائق:
- آخر
- معدات:
- نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف الإعلان:
- A207-50-407
- رقم المرجع:
- 89056
- تحديث:
- آخر مرة في ٠٩.٠٣.٢٠٢٦
وصف
Vehicle location: Bovenden. 3 axles, air suspension, rear axle steered, ABS (anti-lock braking system), lashing eyes, underrun protection, support legs, storage box.
Body: 2 units available!
Overall length approx.: 13,800 mm
Maximum overall width: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Giodpfsx Hkciex Ag Tsp
Low-bed length approx.: 9,600 mm
Loaded bed height in low-bed approx.: 900 mm
Internal width approx.: 2,480 mm
Fifth wheel height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
High-strength fine-grain steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with 'Load-Lock profile' for attaching lashing straps, 8 pairs of additional lashing eyes integrated into the outer frame, each rated to 5t.
1x plug-in balancing support (3-piece) on the low bed deck, top wooden cross support at least 200 mm wide for height compensation; gooseneck insertable in 3 positions with parking position at the kink. 4 pairs of stanchion pockets (83 x 83 mm) integrated into the floor for inserting the balancing support; compartment for removable stanchions open, located under the loading floor.
13 pairs of stanchion pockets (70 x 40 mm internal) recessed into the outer frame (3 pairs on gooseneck and 10 pairs on low-bed area); 3 rows of stanchion pockets in the floor, each with 7 pockets (70 x 40 mm internal); 26 removable stanchions (80 mm wide / 50 mm deep / 1,200 mm long), hot-dip galvanized. Hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to prior sale, errors and change!
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Body: 2 units available!
Overall length approx.: 13,800 mm
Maximum overall width: 2,550 mm
Overall height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Giodpfsx Hkciex Ag Tsp
Low-bed length approx.: 9,600 mm
Loaded bed height in low-bed approx.: 900 mm
Internal width approx.: 2,480 mm
Fifth wheel height approx.: 1,150 mm
King pin mounting dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm
High-strength fine-grain steel welded construction in reinforced design, fifth wheel plate with replaceable 2" king pin, slightly inclined outer frame with 'Load-Lock profile' for attaching lashing straps, 8 pairs of additional lashing eyes integrated into the outer frame, each rated to 5t.
1x plug-in balancing support (3-piece) on the low bed deck, top wooden cross support at least 200 mm wide for height compensation; gooseneck insertable in 3 positions with parking position at the kink. 4 pairs of stanchion pockets (83 x 83 mm) integrated into the floor for inserting the balancing support; compartment for removable stanchions open, located under the loading floor.
13 pairs of stanchion pockets (70 x 40 mm internal) recessed into the outer frame (3 pairs on gooseneck and 10 pairs on low-bed area); 3 rows of stanchion pockets in the floor, each with 7 pockets (70 x 40 mm internal); 26 removable stanchions (80 mm wide / 50 mm deep / 1,200 mm long), hot-dip galvanized. Hardwood floor approx. 30 mm thick, longitudinally laid with omega profiles for high point load capacity in the wheel arch area; steel/chequer plate floor. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to prior sale, errors and change!
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2002
2.323 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 551 8... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


























