مقطورة الماشيةSchlögl Fahrzeugbau
SV 35 40 18 AB
مقطورة الماشية
Schlögl Fahrzeugbau
SV 35 40 18 AB
سعر ثابت دون ضريبة القيمة المضافة
21.000 €
(24.990 € إجمالي)
الحالة
جديد
الموقع
Pfarrkirchen 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
21.000 €
(24.990 € إجمالي)
- الموقع:
- Indutriestr. 6, 84347 Pfarrkirchen, Deutschland

اتصل
تفاصيل فنية
- وزن فارغ:
- 1.350 كجم
- الوزن الأقصى للحمولة:
- 2.150 كجم
- الوزن الإجمالي:
- 3.500 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 3.980 مم
- عرض مساحة التحميل:
- 1.800 مم
- ارتفاع مساحة التحميل:
- 1.870 مم
- مقاس الإطار:
- 225/70 R15 C
- لون:
- فضي
تفاصيل العرض
- معرّف القائمة:
- A207-10-075
- التحديث الأخير:
- في ٠٨.١٢.٢٠٢٥
الوصف
Tandem Car Livestock Trailer, Manufacturer: Schlögl Fahrzeugbau, Model: SV 35 40 18 AB, Approximate Internal Dimensions (LxWxH): 3980 x 1800 x 1870 mm, Permissible Total Weight: 3500 kg, Axle Load Capacity: 3600 kg
Equipment:
- Chassis with reinforced, maintenance-free rubber suspension axles, 2x 1800 kg (axle load capacity 3600 kg)
- Tires 225/70 R15 C
- Axle shock absorbers for improved driving performance
- Non-slip aluminum chequer plate fenders with mud flaps
- Galvanized V-drawbar
- Overrun brake with automatic reversing function and ball coupling
- Reinforced automatic jockey wheel with solid rubber tire and metal rim (load capacity approx. 500 kg)
- 12V lighting system with 13-pin connector and reversing light
- LED position lights red/white
- LED marker lights white
- LED interior light with switch
- Additional LED reversing spot
- Sturdy frame made of high-quality steel profiles, fully hot-dip galvanized
- Drop sides made of double-walled aluminum profile 25 mm, bare finish
- 1x top front ventilation flap, approx. 1450 x 230 mm
- 2x top side ventilation flaps on each side, approx. 1200 x 230 mm
- All ventilation flaps fitted with V2A stainless steel hinges and tongue locks
- Continuous tying rail front inside
Gkedex Eaz Nopfx Adysf
- 1x maneuvering handle on exterior
- Superstructure with left front side door
- Aluminum partition wall approx. 1500 mm, with quick release and adjustable track
- Aluminum chequer plate floor with upturned sides, welded into a single trough with the walls
- Special rubber floor covering with integrated climbing strips on rear ramp
- Ramp lifting device/tension spring for rear ramp
- 1 set swivel gates for rear ramp, approx. 1350 mm above vehicle floor
- Lifting aid and lock for swivel gates
- Dibond insulation flat roof
All of our in-house models are custom-made, specifically manufactured to customer specifications. Size and equipment can, of course, be adapted to your individual requirements.
(Images may show optional, extra-cost accessories! Errors, changes, and omissions excepted!)
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Equipment:
- Chassis with reinforced, maintenance-free rubber suspension axles, 2x 1800 kg (axle load capacity 3600 kg)
- Tires 225/70 R15 C
- Axle shock absorbers for improved driving performance
- Non-slip aluminum chequer plate fenders with mud flaps
- Galvanized V-drawbar
- Overrun brake with automatic reversing function and ball coupling
- Reinforced automatic jockey wheel with solid rubber tire and metal rim (load capacity approx. 500 kg)
- 12V lighting system with 13-pin connector and reversing light
- LED position lights red/white
- LED marker lights white
- LED interior light with switch
- Additional LED reversing spot
- Sturdy frame made of high-quality steel profiles, fully hot-dip galvanized
- Drop sides made of double-walled aluminum profile 25 mm, bare finish
- 1x top front ventilation flap, approx. 1450 x 230 mm
- 2x top side ventilation flaps on each side, approx. 1200 x 230 mm
- All ventilation flaps fitted with V2A stainless steel hinges and tongue locks
- Continuous tying rail front inside
Gkedex Eaz Nopfx Adysf
- 1x maneuvering handle on exterior
- Superstructure with left front side door
- Aluminum partition wall approx. 1500 mm, with quick release and adjustable track
- Aluminum chequer plate floor with upturned sides, welded into a single trough with the walls
- Special rubber floor covering with integrated climbing strips on rear ramp
- Ramp lifting device/tension spring for rear ramp
- 1 set swivel gates for rear ramp, approx. 1350 mm above vehicle floor
- Lifting aid and lock for swivel gates
- Dibond insulation flat roof
All of our in-house models are custom-made, specifically manufactured to customer specifications. Size and equipment can, of course, be adapted to your individual requirements.
(Images may show optional, extra-cost accessories! Errors, changes, and omissions excepted!)
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2013
تقديم الطلب
الهاتف & فاكس
+49 8561 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ















