مقطورة نصفية مفتوحة مع قماش مشمع

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse

Portal doors bent on both right and left sides,

Rear underrun protection bent on the right side,

Cedex Dn Tdepfx Af Sshf
Splash guard on the 2nd and 3rd axle missing on the right side,

3rd axle left tire has air loss,


KRONE SD Curtain Mega Edscha Roof Lifting Axle (1st + 3rd axle) Multilock Outer Frame

Gross vehicle weight: 36,000 kg,
Unladen weight: 6,196 kg,
Payload: 29,804 kg,
Fifth wheel height unladen: approx. 985 mm,
BPW axles,
Lifting axle 1st and 3rd axles,
Air suspension,
Disc brakes,
Edscha sliding roof,
Hydraulic lifting roof with 500 mm total lift, can be raised separately at all 4 corner posts,
Curtain-side tarpaulin with diagonal belt, curtains can be moved on both right and left sides,
Portal doors,
Underrun protection on right, left, and rear,
2x crank supports,
Rear right access ladder,
Stowage box left,
Stowage box right,
Suitable for forklift loading,
Metal ram buffers,
Multilock outer frame,
ABS,
EBS,
ALB,
DIN EN 12642 Code XL,
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm,
Loading area LxWxH: 13,561 x 2,480 x 3,003 mm,
External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm,
Rear portal through-loading height: 2,785 mm,
Rear through-loading width: 2,480 mm at clear width,
Tires: 435/50R19.5 on ALCOA aluminum rims,
Tread depth left front: 7 mm,
Tread depth left center: 10 mm,
Tread depth left rear: 5 mm,
Tread depth right front: 8 mm,
Tread depth right center: 9 mm,
Tread depth right rear: 6 mm,

Additional Equipment:
Type: SD,
Suitable for tractor units (ISO 1726 limited – truck data required!),
King pin distance to center of support device approx. 2,720 mm,
Fifth wheel height unladen: approx. 985 mm,
Double-T longitudinal and central beam as well as outer frame, welded with crossbeams and outriggers,
Multilock outer frame, universal load securing options every 100 mm,
Build height front: 80 mm (including floor and fifth wheel plate),
2” king pin,
Rear underrun protection according to EC directive,
Side protection according to EC directive,
Rear sliding step ladder,
Door retainers,
Two mechanical landing gears, 2 x 12 tons, half-round with base plate,
Single-sided operation of landing gears, on front right,
3 axles with 9,000 kg load capacity each,
BPW axles, 19.5”, with air suspension (total lift 260 mm) and disc brakes (ET 120),
Brake disc diameter: 370 mm,
With lifting and lowering function, including automatic driving height reset,
Load-dependent fully automatic electronic lifting axle control for 1st axle,
Load-dependent fully automatic electronic lifting axle control for 3rd axle,
Manual function on control console for forced lifting (starting aid according to Directive 97/27/EC) and forced lowering via rotary switch,
Note: Reduced ground clearance in area of lifting axle!
Lifting axle sequence: 3rd axle lifts first / lowers last,
Plastic wheel cover (mudguard),
Splash protection according to EC directive,
Brake system according to ECE Regulation 13 (including vehicle stabilization function),
Spring-type parking brake,
Brake line connections at the front approx. 675 mm above platform,
Diagnostics via ISO 7638 connector (EBS supply cable),
Standard air connections ISO 1728 (palm coupling),
Brake system manufacturer: Wabco,
EBS system, 2S/2M, 2 sensors on one axle,
Lighting and light signaling system ECE R48,
2 x LED license plate lights,
2 outline marker lights with rubber arm, LED version,
LED side marker lights with direction indicator function (blink),
E. cable connections at front approx. 450 mm above platform,
24 volt, front wit

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.