عربة مسطحة منخفضة نصف مقطورة

Faymonville MAX Trailer 3-A-Tele-Semi-Radmul.-Rampen

Gooseneck:
- Gooseneck with 30 mm thick hardwood flooring
- Gooseneck, rear section in straight design
Gujdsxwxtbepfx Abrsi
- 3 pairs of lashing rings

Loading Platform:
- Extendable loading platform with rear chamfer, approx. 1,000 mm x 8°
- 1 pair of fixed, built-in wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widened lower sections
- Between the 1st and 2nd axle, a pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm
- Includes three-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t/pcs
- 1 pair of horizontal lashing rings at the front of the loading platform
- 5 pairs of outward folding lashing rings
- 2 pairs of outward folding lashing rings
- Cut-outs in the outer frame of the loading platform for attaching tension belts
- Hardwood flooring on the rear chamfer, approx. 48 mm thick, checker plate covering over the axles

Axles and Tyres:
- BPW axles and suspension, 2 fixed axles, 1 self-steering axle
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with raise/lower valve
- Axle tool kit
- Tyres: 235/75 R 17.5 3PMSF

Included Accessories:
- One galvanized steel front wall, approx. 1,200 mm high
- 2" kingpin
- Yellow-red air couplings on the galvanized front connection rail
- 2 wheel chocks with holder on the front wall
- Galvanized, extendable side extensions, up to approx. 230 mm per side
- Galvanized folding supports under the chamfered end of the loading platform
- Bracket for rotating beacon on the rear of the trailer
- Sliding mounting bar for aluminum loading ramps at the rear of the vehicle
- Yellow reflector tape per EU regulations on the sides, extension and rear of the trailer
- Mounts with sockets for warning signs on both the gooseneck and rear panel, left and right
- Mudflap at the rear of the trailer
- European reflector signs at the rear of the trailer
- Manual and description on USB stick
- Plug-in aluminum side and rear walls on the gooseneck, approx. 2,440 x 400 mm
- Rear galvanized stakes are removable
- 3 pairs of WADER container locks in the load floor for 20ft or 40ft container
- 3 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the load platform
- 1 removable galvanized intermediate table with 1 pair of WADER container locks
- 1 pair of recessed lashing rings along the central beam at the rear chamfer
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position light
- Bracket for rotating beacon on the warning signs
- Load gauge (manometer) for axle load determination including load diagram

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.