ناقلة سيارات

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

4-axle Volvo machine carrier/working platform transporter
– FH 500 8x2R

– Trailing axle, electro-hydraulically steered, single tires
– Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle
– Safety long-distance driver's cab FH
– Cab heater, 2 kW
– 33 l refrigerator with freezer compartment under the bunk
– Air suspension on front axle(s)
– Gearbox/I-Shift operation from the driver's seat control unit
– I-Shift driving modes: Standard, Performance and Economy
– I-See with map-based topography and traffic information
– Eco cruise control (cruise control), including brake cruise control
– Manual shifting in automatic mode possible (incl. kickdown) Adaptive traction control
– Distance-regulating cruise control (ACC) with collision warning and emergency braking function
– Lane keeping assistant
– Side collision avoidance and turn assist (both sides)
– Driver alertness system, warns of fatigue
* VEB Volvo Engine Brake
* etc.

WIESE body for platform and construction machine transport with hydraulic loading ramps

with 2 pairs of wheel recesses incl. covers

Body dimensions:
- Length approx. 9,050 mm usable length
- External width 2,550 mm
- Loading height approx. 1,050 mm unladen (top of floor)
- Stable, weight-optimized steel welded construction, space-efficient design
- Short cross member spacing for high point loads
- Chamfered rear for low ramp angle
- Outer frame profile 90°
- Bulkhead in reinforced design
- Storage box inside, below the bulkhead
- Grating floor
- Designed for 5,000 daN wheel load
- Steel toolboxes above the axles and anti-slip coating on outer frame

Load securing:
- 9 pairs of heavy-duty lashing rings, 8 t, recessed into outer frame
- Longitudinal beams with Multi-X contour full length with numerous 2.5 t lashing points
- 4 lashing eyes 8 t at rear (left/right/center/center)
- 4 lashing eyes 8 t in front of bulkhead (left/right/center/center)
- Outer frame profile 90°

Ramps:
Type: WFB 20 S-2
Load capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp

- Ramps designed as 2 single/extended ramps, both ramps laterally adjustable
- Ramp can be used as a loading ramp or crossover ramp for warehouse equipment (extension remains closed); the fixed part is placed on the warehouse ramp
- Sturdy tension bar for transport security (optionally with strap tensioning)
- 2 hydraulic rear supports with plates, warning sound and indicator in cab
- Ramp and support driven by electro-hydraulic system
- Control via radio remote as well as emergency operation at control block
- Control block mounted in stainless toolbox mounted laterally on frame
- Superwinch 8.2 t with approx. 20 m steel cable
- Access with handrails right and left for loading area access
- 5 stainless steel toolboxes in drawer design, incl. lighting
- Side panels as per sample images (green vehicle)
Rodpfsw Itmlox Agcsch
- Body coating KTL
- Tow coupling with ball head at rear, 3.3 t
- 4 LED work lights
- 2 LED rear lights mounted at top of bulkhead
- 4 LED work lights outside on frame for area illumination
- 2 LED work lights at rear
- 1 removable beacon at rear

The stock vehicle is supplied with a white cab and superstructure in nova gray (external frame lacquered in RAL color of choice on request)

Further information upon request.

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.