علامة الحقيبةPartenheimer
Kofferdeckel 3000 KG
علامة الحقيبة
Partenheimer
Kofferdeckel 3000 KG
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
10.017 €
(11.920 € إجمالي)
الحالة
جديد
الموقع
Roxheim 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
10.017 €
(11.920 € إجمالي)
- الموقع:
- Rüdesheimer Straße 19, 55595 Roxheim, Deutschland

اتصل
تفاصيل العرض
- معرّف الإعلان:
- A191-43-596
- تحديث:
- آخر مرة في ١٤.٠٥.٢٠٢٥
وصف
100% Made in Germany
Order vehicle!!!
Basic equipment:
− Rubber spring tandem axle, each with a load capacity of 1500 kg
− Body width 1800 mm
− Body length 2700 mm
− Body height 1100 mm
Hnedjwkh Spjpfx Af Eok
− 5 x 10-inch tires
− Wheel shock absorbers for 100 km/h
− Automatic support wheel
− 2 x wheel chocks
− Exterior completely painted with 2-component paint
− Industrial wooden floor made of 18 mm solid birch, screen-printed
− 5 floor tie-down points on each long side of the frame
− Integrated 12V 13-pin lighting with interior light
− Spare tire holder
− TÜV certificate for new vehicles
Base frame made of steel profiles, welded and then hot-dip galvanized.
The box body consists of a head and rear wall and is permanently attached to the base frame. The front and rear walls are each made of a screen-printed panel. The roof section is fixed and made of aluminum. Side flaps are 400 mm long and can be folded down and are made of aluminum. A hinged lid on each side can be locked and lifted.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Order vehicle!!!
Basic equipment:
− Rubber spring tandem axle, each with a load capacity of 1500 kg
− Body width 1800 mm
− Body length 2700 mm
− Body height 1100 mm
Hnedjwkh Spjpfx Af Eok
− 5 x 10-inch tires
− Wheel shock absorbers for 100 km/h
− Automatic support wheel
− 2 x wheel chocks
− Exterior completely painted with 2-component paint
− Industrial wooden floor made of 18 mm solid birch, screen-printed
− 5 floor tie-down points on each long side of the frame
− Integrated 12V 13-pin lighting with interior light
− Spare tire holder
− TÜV certificate for new vehicles
Base frame made of steel profiles, welded and then hot-dip galvanized.
The box body consists of a head and rear wall and is permanently attached to the base frame. The front and rear walls are each made of a screen-printed panel. The roof section is fixed and made of aluminum. Side flaps are 400 mm long and can be folded down and are made of aluminum. A hinged lid on each side can be locked and lifted.
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2025
17 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 671 8... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ




























