مقطورة سيارةPartenheimer
Kastenanhänger 750 KG inkl. Plane&Spriegel
مقطورة سيارة
Partenheimer
Kastenanhänger 750 KG inkl. Plane&Spriegel
سعر ثابت دون ضريبة القيمة المضافة
1.508 €
(1.795 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Roxheim 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
1.508 €
(1.795 € إجمالي)
- الموقع:
- Rüdesheimer Straße 19, 55595 Roxheim, Deutschland

اتصل
تفاصيل العرض
- معرّف القائمة:
- A191-41-821
- التحديث الأخير:
- في ١٤.٠٥.٢٠٢٥
الوصف
100% Made in Germany
New vehicle - available immediately!!!
Standard equipment:
− Rubber suspension axle, 750 kg
− Body width 1.18 m
− Body length 2.10 m
− Rigid ball coupling
− 2x 145/80R13 tires
− 2x plastic fenders
− Jockey wheel
− 2x plastic wheel chocks
− 8 internal eyelets for fastening
− Side and head walls approx. 380 mm high
− Industrial wooden floor made of 15 mm solid birch, screen-printed
− 16 net hooks in the side, head, and rear walls
− 2 tie-down straps per side wall
− 2 drop legs in the rear
− Integrated 12V 13-pin lighting with interior light
− 100 km/h
Guedpfx Abswkgg Sersi
− TÜV certificate for new vehicles
− Flatbed frame construction
Side walls / head wall / lamp holders / beams / rear flap are made of 2.50 mm galvanized sheet steel and are fully riveted.
Corner stanchions are hot-dip galvanized. Removable rear flap with steel hinges and corner locks as well as stop.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
New vehicle - available immediately!!!
Standard equipment:
− Rubber suspension axle, 750 kg
− Body width 1.18 m
− Body length 2.10 m
− Rigid ball coupling
− 2x 145/80R13 tires
− 2x plastic fenders
− Jockey wheel
− 2x plastic wheel chocks
− 8 internal eyelets for fastening
− Side and head walls approx. 380 mm high
− Industrial wooden floor made of 15 mm solid birch, screen-printed
− 16 net hooks in the side, head, and rear walls
− 2 tie-down straps per side wall
− 2 drop legs in the rear
− Integrated 12V 13-pin lighting with interior light
− 100 km/h
Guedpfx Abswkgg Sersi
− TÜV certificate for new vehicles
− Flatbed frame construction
Side walls / head wall / lamp holders / beams / rear flap are made of 2.50 mm galvanized sheet steel and are fully riveted.
Corner stanchions are hot-dip galvanized. Removable rear flap with steel hinges and corner locks as well as stop.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2025
تقديم الطلب
الهاتف & فاكس
+49 671 2... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


















