مقطورة نصف قلابة

PRIMETZHOFER 1-A Lenksattel AluKippmu 4,25t 17m3

WhatsApp
PRIMETZHOFER 1-axle aluminum rear-tipping steering semi-trailer
German vehicle, first owner
Top condition, new TÜV inspection!
22,210 kg payload!!
In conjunction with a 3-axle tractor unit = 36,000 kg gross vehicle weight!!!!
Depending on the tractor unit, up to approximately 24 tonnes payload!!!!
Trailer unit data
3-axle 6x4 fifth wheel height unloaded: 1,300 mm
Body dimensions approx. 6,000/2,420/1,150 mm.
Frame
Naxtra welded steel frame construction
Loading height unloaded: approx. 500 mm above fifth wheel coupling.
Chassis
Air suspension with automatic Ride level control
Air bellows ø 360 mm
"BPW" air suspension steering axle with steering knuckle and electro-hydraulic self-steering, 12 ton axle load at 80 km/h, S-cam brake 420/200 mm, asbestos-free brake pads, AGS, with wear indicator, centered wheel connection
Steering
Electro-hydraulic steering via electro-hydraulic unit with tracking/self-steering via cable remote control, power supply via NATO socket, steering lock with automatic disengagement
Tires:
2 x 445/65 R 22.5 168K
2 steel rims 13.00 x 22.5, 10-hole, factory silver
Steering device
2 x insert tubes (outside 100 x 100 mm) and Formed tube angle support legs for parking the empty vehicle.
Braking system
EC two-wire brake designed for an axle load of 12 tons.
Spring-loaded parking brake.
EBS - electronic braking system (Wabco 2S2M).
Aluminum air reservoir.
1 safety cable.
Adjustable rear underrun protection
Rigid tilt shaft with 2 greasable tilt bearings, rubber pads for noise reduction.
EBS brake/light connections / 15-pin.
Brake connection with red and yellow coupling head.
24-volt lighting system according to EC directives.
Multi-chamber tail lights, including fog/reverse lights + triangular reflectors.
Side marker lights
Rear license plate lights
Rubber neck clearance lights front and rear
2x reversing lights
Plastic quarter fender with cover plate
Wheel chock with bracket
Bracket for shovel/broom/rake at the front
Tow hook at the rear of the frame
Hydraulic connecting hose
Edbro 1" screw coupling
HYVA high-pressure front lift cylinder, 250 bar, 51-degree tipping angle
Aluminum box body 6,000 mm x 2,420 mm x 1,150 mm (tailgate with chute at 17°).
Volume approx. 16.7 m³
Body floor made of 8 mm aluminum sheet, grade H34 HB110.
Aluminum bulkhead angled at 17° with sturdy top flange and mounting brackets for the front lift cylinder.
Body walls made of 40/4/2 mm thick aluminum hollow sections with Aluminum top flange profiles projecting inward
Surface-mounted aluminum swing tailgate angled 17° with chute including additional manual tension locks
Simple self-aligning bearing on the tailgate
Automatic 2-hook rear wall locking mechanism with return spring, additional manual spring latch.
Crossbar on the top flange
PVC roll-up tarpaulin in 900 g/m³ quality, attached in FR RIGHT including tarpaulin lashing on the side
ALUMINUM ROUND TUBE including closure on the front wall
Painting
Steel granulate cleaning, zinc dust primer, and spray painting with 2-component commercial vehicle acrylic paint.
RAL 3002 RED = chassis, underride protection, tipper body, front wall, pillars, and chute, side walls, and rear wall.
Black plastic parts and powder-coated attachments/installations,
Rear marker plate ECE70
Condition: GOOD considering age and mileage!
Ledpfxowikw So Acwjhd
All information is subject to change!

PLEASE NOTE: PRICE IS NET PLUS VAT
German, English: JOSEF
WhatsApp:

We speak the following languages: German, Czech, Polish, Romanian, Russian,

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.