مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
سعر ثابت دون ضريبة القيمة المضافة
36.500 €
(43.435 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
36.500 €
(43.435 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.950 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
تفاصيل العرض
- معرّف القائمة:
- A186-10-211
- الرقم المرجعي:
- 6215
- التحديث الأخير:
- في ١١.١٠.٢٠٢٥
الوصف
* ETÜ-TA-ER 14.4 Platform:
* RDÜ (Tire Pressure Monitoring)
* EBS (Electronic Braking System)
* Emergency Release Device for Spring Brake Cylinders
* Drum Brakes
* 2 x 7 t BPW Axles
* Air Suspension with Lift and Lowering Facility
* Mechanically Adjustable 3 m Warning Sign Packages Front and Rear
* Drawbar Adjustable in Height by 300 mm with 40 mm Flange Tow Eye
* Drawbar Shortened by approx. 200 mm to approx. 1,800 mm (therefore B-measure of approx. 8,080 mm)
* Support Winch at Front
* External Folding Supports at Rear
* Plastic Toolboxes approx. 750 x 350 x 300 mm each on left & right side
* Side Impact Protection
* Underrun Protection
* Plastic Quarter Mudguards
* 15-pin Power Connector
* LED Lighting System 12 / 24 V
* 2 Additional LED Reversing Lights at Rear (activated via reverse gear)
* 1 Removable LED Beacon incl. Bracket at Rear
* 400 mm High Bolted Front Wall
* 50 mm Softwood Floor
* 2 Pairs of Container Locks (extendable to 3 m container external width and lockable, lock dimension retracted as per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm - this dimension is not to DIN - for an absolute outside width of 3,000 mm)
* Perforated Outer Frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; each side fitted with 5 x 3 t UVV-compliant lashing rings; at each corner, front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the softwood floor, rear in the end cross member); various holes in front and rear cross members for 1.2 t lashing options
* 1 Pair Aluminum Slide-in Ramps approx. 3,570 x 410 mm (10 t capacity / pair) suitable for rubber-tired and tracked vehicles
* Rear storage compartment integrated into chassis below the loading area
* --- Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized ---
* Axles, air tank, front winch and flange tow eye painted in black
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from calendar week 09/2026
Itodpev D Tbdjfx Abnsr
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* RDÜ (Tire Pressure Monitoring)
* EBS (Electronic Braking System)
* Emergency Release Device for Spring Brake Cylinders
* Drum Brakes
* 2 x 7 t BPW Axles
* Air Suspension with Lift and Lowering Facility
* Mechanically Adjustable 3 m Warning Sign Packages Front and Rear
* Drawbar Adjustable in Height by 300 mm with 40 mm Flange Tow Eye
* Drawbar Shortened by approx. 200 mm to approx. 1,800 mm (therefore B-measure of approx. 8,080 mm)
* Support Winch at Front
* External Folding Supports at Rear
* Plastic Toolboxes approx. 750 x 350 x 300 mm each on left & right side
* Side Impact Protection
* Underrun Protection
* Plastic Quarter Mudguards
* 15-pin Power Connector
* LED Lighting System 12 / 24 V
* 2 Additional LED Reversing Lights at Rear (activated via reverse gear)
* 1 Removable LED Beacon incl. Bracket at Rear
* 400 mm High Bolted Front Wall
* 50 mm Softwood Floor
* 2 Pairs of Container Locks (extendable to 3 m container external width and lockable, lock dimension retracted as per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm - this dimension is not to DIN - for an absolute outside width of 3,000 mm)
* Perforated Outer Frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; each side fitted with 5 x 3 t UVV-compliant lashing rings; at each corner, front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the softwood floor, rear in the end cross member); various holes in front and rear cross members for 1.2 t lashing options
* 1 Pair Aluminum Slide-in Ramps approx. 3,570 x 410 mm (10 t capacity / pair) suitable for rubber-tired and tracked vehicles
* Rear storage compartment integrated into chassis below the loading area
* --- Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized ---
* Axles, air tank, front winch and flange tow eye painted in black
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from calendar week 09/2026
Itodpev D Tbdjfx Abnsr
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ























































