استبدل الجسم بجسم الصندوق

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

7.82 m BDF Krone Smooth-Sided Swap Body, used (multiple units available)

Color: White
Drop-off height: 1120 mm
The swap body is watertight and the roller shutter door operates smoothly.

Approximate external dimensions (mm):
Length 7820 x Width 2550 x Height 2925
Approximate internal dimensions (mm):
Length 7700 x Width 2480 x Height 2700

Door opening (mm):
Width 2370 x Height 2530
Lashing: Keyhole type

Permissible total weight for approval/operation: 16,000 kg
Intermodal ready, incl. rail coding to DIN EN 13044
Rail approval Code XL (for rail transport at speeds over 120 km/h)

Floor frame:
195 mm high floor module incl. floor panel; rectangular tube longitudinal beams with cross members and outer frame as welded construction with underfloor guide tunnel
4 container corner castings on 20' basis, symmetrical overhangs, 4 grab bar profiles
7 pairs of lashing rings at the sides in the rubbing strip

Floor:
Type: BO WST
27 mm thick, waterproof bonded phenolic resin-coated plywood floor, strength as per DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg
2 ventilation openings at the front in the floor (as per GGVS)

Box body:
Superstructure type: AB WST
Internal height: 2700 mm
Portal height (internal): 2525 mm
Total height: 2925 mm
Corner height: 2900 mm
Hpjdevxbfmjpfx Abaja
Closed superstructure
Smooth side walls made of galvanized steel sheet panels
Roof made of trapezoidal profiled steel sheets, panel height: 25 mm
2 ventilation grills per side wall
Rubbing rail and side wall with recesses; internal forklift impact protection, 3-sided, approx. 300 mm high
Front wall smooth, made of galvanized steel sheet panels
Interior front wall with 21 mm phenolic resin-coated plywood, 750 mm high, above that continuous 12 mm plywood
Exterior front wall upper section offset (optimized for cornering)
Rear wall with roller shutter door (net width: 2370 mm), with DB Train Plus approval, replaceable rollers
Flat steel impact protection for roller shutter guide rails
Side walls internally fully covered with keyhole plates
13 steel guide rails recessed left and right for double-deck load bars
13 LM load beams for double-deck loading
Horizontal steel impact protection on rear profile, left and right


Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.