مقطورة الماشيةSchlögl Fahrzeugbau
SV 35 40 18 AB
مقطورة الماشية
Schlögl Fahrzeugbau
SV 35 40 18 AB
سعر ثابت دون ضريبة القيمة المضافة
21.000 €
(24.990 € إجمالي)
الحالة
جديد
الموقع
Pfarrkirchen 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
21.000 €
(24.990 € إجمالي)
- الموقع:
- Indutriestr. 6, 84347 Pfarrkirchen, DE

اتصل
تفاصيل فنية
- وزن فارغ:
- 1.350 كجم
- الوزن الإجمالي:
- 3.500 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 3.980 مم
- عرض مساحة التحميل:
- 1.800 مم
- ارتفاع مساحة التحميل:
- 1.870 مم
- مقاس الإطار:
- 225/70 R15 C
تفاصيل العرض
- معرّف القائمة:
- A177-84-876
- التحديث الأخير:
- في ٢٢.١١.٢٠٢٤
الوصف
Tandem livestock trailer, make: Schlögl Fahrzeugbau, type: SV 35 39 18 AB, internal dimensions approx. (LxWxH): 3980 x 1800 x 1870 mm, gross vehicle weight rating: 3500 kg, axle load: 3600 kg
Equipment:
- Chassis with reinforced, maintenance-free rubber spring axles 2x 1800 kg (axle load 3600 kg)
- 225/70 R15 C tires
- Axle shock absorbers for improved handling
- Aluminum checker plate mudguards with mud flaps
- Galvanized V-drawbar
- Overrun brake with automatic reverse and ball clutch
- Reinforced automatic support wheel with solid rubber tires and metal rim (load capacity approx. 500 kg)
- 12V lighting system with 13-pin plug and reversing lights
- LED position lights red/white
- LED marker lights white
- LED interior light with button
- Additional LED reversing light
- Sturdy frame made of high-quality steel profile, completely hot-dip galvanized
- Side walls made of double-walled aluminum profile 25 mm thick, blank
- 1x top front ventilation flap, approx. 1450 x 230 mm
- 2x ventilation flaps at the top of each side, approx. 1200 x 230 mm
- all ventilation flaps each with V2A hinges and tongue locks
- Continuous tie rod at the front inside
- 1x maneuvering handle on the outside of the body
- Body with side door front left
- Aluminum partition wall approx. 1500 mm, with quick-release fastener and adjustment rail
- Aluminum checker plate floor folded up at the sides and welded to the walls to form a trough
- Special rubber coating with integrated climbing rails on rear tailgate
- Ramp lifter/ tension spring for rear tailgate
- 1 set of swing-out gates for rear tailgate, approx. 1350 mm from vehicle floor
- Lifting aid and locking mechanism for swing-out gate
- Dibond Iso flat roof
All of our own products are custom-made and are specially manufactured to customer specifications. The size and equipment can of course be adapted to your individual requirements.
(Illustrations may contain accessories subject to a surcharge! Misprints, changes and errors excepted!)
Bwjdpfeu T Ebpjx Acwsw
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Equipment:
- Chassis with reinforced, maintenance-free rubber spring axles 2x 1800 kg (axle load 3600 kg)
- 225/70 R15 C tires
- Axle shock absorbers for improved handling
- Aluminum checker plate mudguards with mud flaps
- Galvanized V-drawbar
- Overrun brake with automatic reverse and ball clutch
- Reinforced automatic support wheel with solid rubber tires and metal rim (load capacity approx. 500 kg)
- 12V lighting system with 13-pin plug and reversing lights
- LED position lights red/white
- LED marker lights white
- LED interior light with button
- Additional LED reversing light
- Sturdy frame made of high-quality steel profile, completely hot-dip galvanized
- Side walls made of double-walled aluminum profile 25 mm thick, blank
- 1x top front ventilation flap, approx. 1450 x 230 mm
- 2x ventilation flaps at the top of each side, approx. 1200 x 230 mm
- all ventilation flaps each with V2A hinges and tongue locks
- Continuous tie rod at the front inside
- 1x maneuvering handle on the outside of the body
- Body with side door front left
- Aluminum partition wall approx. 1500 mm, with quick-release fastener and adjustment rail
- Aluminum checker plate floor folded up at the sides and welded to the walls to form a trough
- Special rubber coating with integrated climbing rails on rear tailgate
- Ramp lifter/ tension spring for rear tailgate
- 1 set of swing-out gates for rear tailgate, approx. 1350 mm from vehicle floor
- Lifting aid and locking mechanism for swing-out gate
- Dibond Iso flat roof
All of our own products are custom-made and are specially manufactured to customer specifications. The size and equipment can of course be adapted to your individual requirements.
(Illustrations may contain accessories subject to a surcharge! Misprints, changes and errors excepted!)
Bwjdpfeu T Ebpjx Acwsw
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2013
تقديم الطلب
الهاتف & فاكس
+49 8561 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ












