تكنولوجيا الطين

Brand GT SP 600 HD

SP 600 HD
Brand slurry separator
in standard equipment
Motor power 5.5 KW
Speed 11.7 rpm
Screen basket Ø 258 mm
- Electric motor 400V, 50Hz, 1450 rpm
- Insulation class F=155°C
- Protection class IP55
- Corrosion-resistant stainless steel
Slotted screen basket
- Extra powerful heavy-duty gear
- Replaceable wear ring
- Sealing to the medium
by means of a radial shaft seal
- Adjustable outlet opening
for solids
- Service opening
(VA quick-closing cap)
- Inlet and outlet 4"
- Stainless steel heavy-duty press screw
with a
Hnodpfeubfu Esx Aggok
special hard material coating
- With a 1 mm screen basket
a TS content
of 35 - 40% in the solids is achieved

Eccentric screw pump 35-6LS
Minimum flow rate: at 75 rpm 5.6m /h
Max. delivery rate: at 350 rpm 29m /h
Nominal power 5.5 kW
Nominal speed 1460 rpm
Voltage 400/690 V
Nominal frequency 50 Hz
Protection class IP55
Winding protection TF - thermistor
Suction connection DN 125
Pressure connection DN 100
Incl. dry-run protection
Hoses and piping
Pipe construction and hoses
in the mobile unit.
Couplings are pre-mounted on the side of the device so that suction and pressure hoses can be connected.
Control cabinet separator and pump
Housing with door and
electrostatic powder coating
- Color signal gray
- Protective plate IP66
- Cable entry possible at the top and bottom
- Frequency converter for the pump
- Thermal fuse
- Weekly timer

Powder-coated steel frame
Steel frame for the separator
Frame length approx. 3000mm
Frame width approx. 1800mm
Frame height approx. 1250mm

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.