مقطورة منخفضة التحميلMÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
Agrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
سعر ثابت دون ضريبة القيمة المضافة
49.950 €
(59.440 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
49.950 €
(59.440 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا
اتصل
تفاصيل فنية
- الوزن الإجمالي:
- 21.000 كجم
- الوزن الأقصى للحمولة:
- 16.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.500 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 700 مم
تفاصيل العرض
- معرّف القائمة:
- A154-46-713
- الرقم المرجعي:
- 6248a
- التحديث الأخير:
- في ١٠.٠٧.٢٠٢٥
الوصف
* KA-TA-RT 21.0 ML:
* Without ABS / EBS with 40 km/h approval
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem balancing unit with 100 mm wide parabolic springs
* Support winch at the front
* mech. Fall supports at the rear
* firmly welded drawbar with low-maintenance cap for K80 ball head coupling (can be adjusted by + 77 mm / 33 mm via head plate) with raised boom for the connecting cables
* 12 V 7 + 4-pin power cable
* LED lighting system 12 / 24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side
Hfsdpfor Dpz Hsx Acven
* Side marker lights with indicator control
* Plastic quarter fender
* Plastic tool box approx. 750 x 350 x 300 mm on the right side
* Chassis made of fine-grain steel
* Steel pallet 3-way tipping structure with M-Strong side walls (front wall fixed, continuous side walls - without center stanchions - swinging via manual central locking and mechanically foldable with side wall spring lifter
* hydraulic rear wall 500 mm high as hydr. chute and a 115° opening angle
* 4 mm Hardox 450 steel floor
* 1 x 7 tonne lashing eyes in each corner and 4 x 3 tonne lashing eyes on each side - recessed and foldable
* Hot-dip galvanised two-step ladder in front of the front wall in FR left)
* 1 pair of aluminium landing ramps (10 tonne / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm suitable for rubber-tired and tracked vehicles
* 2 mounting slots for aluminum docking ramps embedded in the chassis from the rear Load securing in accordance with EN 12642 XL
* --Coupling height loaded approx. 530 mm
* unloaded approx. 590 mm--
* Body paint in RAL 9010 pure white
* Chassis, drawbar, rear drop supports, underrun protection hot-dip galvanized
* Axles, air tank, support winch at the front
* K80 coupling painted in a black tone
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to reservation
* Available for immediate delivery from Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Without ABS / EBS with 40 km/h approval
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem balancing unit with 100 mm wide parabolic springs
* Support winch at the front
* mech. Fall supports at the rear
* firmly welded drawbar with low-maintenance cap for K80 ball head coupling (can be adjusted by + 77 mm / 33 mm via head plate) with raised boom for the connecting cables
* 12 V 7 + 4-pin power cable
* LED lighting system 12 / 24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side
Hfsdpfor Dpz Hsx Acven
* Side marker lights with indicator control
* Plastic quarter fender
* Plastic tool box approx. 750 x 350 x 300 mm on the right side
* Chassis made of fine-grain steel
* Steel pallet 3-way tipping structure with M-Strong side walls (front wall fixed, continuous side walls - without center stanchions - swinging via manual central locking and mechanically foldable with side wall spring lifter
* hydraulic rear wall 500 mm high as hydr. chute and a 115° opening angle
* 4 mm Hardox 450 steel floor
* 1 x 7 tonne lashing eyes in each corner and 4 x 3 tonne lashing eyes on each side - recessed and foldable
* Hot-dip galvanised two-step ladder in front of the front wall in FR left)
* 1 pair of aluminium landing ramps (10 tonne / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm suitable for rubber-tired and tracked vehicles
* 2 mounting slots for aluminum docking ramps embedded in the chassis from the rear Load securing in accordance with EN 12642 XL
* --Coupling height loaded approx. 530 mm
* unloaded approx. 590 mm--
* Body paint in RAL 9010 pure white
* Chassis, drawbar, rear drop supports, underrun protection hot-dip galvanized
* Axles, air tank, support winch at the front
* K80 coupling painted in a black tone
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to reservation
* Available for immediate delivery from Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ