منصة نصف مقطورة

Meusburger 3-Achs-Mega-Tele-Plateau-nlla

Chassis:
-Welded steel frame construction - Lightweight construction
-Frame neck approx. 110 mm
-Outer frame closed to the outside
Vehicle with extendable central frame, 7,000 mm telescopic (permissible with self-steering axle max. 4,000 mm), each 500 mm pneumatically lockable
-Saddle plate 8 mm with replaceable 2" kingpin
-Frame reinforcement for point load 25 tons over 3 m when retracted
Load-bearing outer frame
-Rear bevel 500 x 100 mm
-Front installation dimension matched to the front corner dimension 2,040 mm
-Underride guard = extended end plate
-Hook-in rail at the rear of the end panel
-Rear drop supports

Support winches:
-Mechanical 24-ton support winches with 1-side operation and thrust compensation

Ijdpjrx N Dvefx Abrebd
Axles:
-BPW air-spring axles, 10 tons axle load each, bellows diameter 360 mm
-Cam brake 300/200 mm, asbestos-free brake linings
-Automatic slack adjuster
-WABCO SmartBoard with lifting and lowering device with total lift approx. 200 mm
3rd axle as friction-steered trailing axle with electrical and mechanical lock

Wheels and tires:
-13 steel disc wheels, 10-hole, with offset, centered.
-13 tires 235/75 R17.5 tubeless.

Mudguards:
-Sheet metal mudguards with splash flaps

Brake system:
-two-wire brake with EBS
-EBS (WABCO 4S3M)
-aluminum air reservoir
-Spring-applied parking brake
-Yellow/red air connection

Floor:
-50 mm hardwood floor, protruding approx. 5 mm over frame profiles

Front wall:
-25 mm aluminum hollow profiles, 2,000 mm high, screwed on, two supports
-2 eyelets for tensioning the front wall in accordance with DIN EN 12642 (5,000daN)

Paintwork:
-Steel granulate cleaning, spray galvanizing Chassis including telescopic primer
-Chassis and wheel hubs in MB 7350 nova gray
-Outer frame and front wall in MB 7350 nova gray
-Reflector tape on the sides and rear in yellow

Accessories:
-Side collision protection
-4 wheel chocks
-1 Spare wheel holder on the side
-Longitudinal license plate holder in the underride guard
-2 ECE plates
-3 pairs of standard lashing rings laterally recessed in the outer frame mounted on the front plateau, tensile force 4 tons each
-9 pairs of heavy-duty lashing rings (foldable) with a tensile force of 8 tons each
-1 pair mounted at the end of the front plateau and 8 pairs mounted in the rear plateau
-6 pairs of mushrooms on the side of the outer frame with web thickness 24 mm for lashing
-8 pairs of stanchion pockets on the side of the outer frame for 100x50 mm stanchions
-3 transverse rows of stanchion pockets for 100x50 mm stanchions (1x in the kingpin area max. 100 mm deep, 1x in front of the axle unit and 1x behind the axle unit - version 100 mm lengthwise 50 mm crosswise)
-Storage compartment for stanchions in front of the front wall (= stanchion pockets in the floor)
Extendable warning signs incl. position lights, at the front on the fifth-wheel support winches and at the rear in front of the end plate, infinitely extendable up to a loading width of 4,500 mm, with 3-pin socket and removable helix
-1 PVC toolboxes 630x400x450 mm
-Container locks for 2 x 20 ft and 1 x 40 ft containers

تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.