علامة الحقيبةUnsinn
SONDERPREIS UDK-S 3620-35-14
علامة الحقيبة
Unsinn
SONDERPREIS UDK-S 3620-35-14
سعر ثابت دون ضريبة القيمة المضافة
10.000 €
(11.900 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Rüthen 

عرض الصور
عرض الخريطة
البيانات الأساسية
- تسمية:
- علامة الحقيبة
- المصنّع:
- Unsinn
- الموديل:
- SONDERPREIS UDK-S 3620-35-14
- رقم المركبة:
- 208663
- سنة الصنع:
- 2024
- الحالة:
- جديد
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
10.000 €
(11.900 € إجمالي)
- الموقع:
- Industriestr. Möhnetal 10, 59602 Rüthen, Deutschland

اتصل
تفاصيل فنية
- وزن فارغ:
- 1.190 كجم
- الوزن الأقصى للحمولة:
- 2.310 كجم
- الوزن الإجمالي:
- 3.500 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 3.660 مم
- عرض مساحة التحميل:
- 2.040 مم
- ارتفاع مساحة التحميل:
- 400 مم
- مقاس الإطار:
- 185R14C
- لون:
- فضي
- معدات:
- رافعة خلفية
تفاصيل العرض
- معرّف القائمة:
- A150-17-638
- التحديث الأخير:
- في ١٣.٠٥.٢٠٢٥
الوصف
SPECIAL PRICE until June 5, 2025!!!
Ksdpfx Aermlzhodysnd
650 mm mesh extension with integrated pendulum bearing in the corner stanchion, 4-sided, ILxIB 3660x2040 mm, type UH, UDK
Aluminum loading ramps, 2560x300 mm, load capacity 2800 kg/pair, and one pair with sturdy pivoting parking supports for 13/14 inch tires
UNSINN plastic tool box, splash-proof, mounted under the loading area, on the right in the direction of travel,
Inner dimensions LxWxH 430x180x188 mm
Frame
-Torsion-resistant longitudinal beam chassis (longitudinal beams continuous from the overrun device to the light bracket) for high directional stability
-Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability
-Integrated ramp shaft with clamping device and foldable license plate holder for safe and elegant storage of the
loading ramps under the Loading Area
-With maintenance support for securing the tilted deck during maintenance work
Joint Wheel
-Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer
-Maneuvering handle with practical tensioning strap retractor for easy handling
Loading Area & Deck
-Solid steel floor extending across the entire width of the vehicle
-Bridge with the maximum number of crossbeams for particularly high point loads
Load Securing
-Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA-certified
-Lashing pins recessed into the steel floor, symmetrically distributed
-Lashing pins on and under the loading area, each capable of withstanding loads of up to 1500 daN (kg) and rotatable 360°
-Pot magnet with key ring for removing the lashing pins when the side panel is open
Side Panels
-Solid steel side panels (400 mm), foldable and removable on four sides, with galvanized angle lever locks and an integrated net and tarpaulin strip, powder-coated in black-gray (RAL 7021).
-Four plug-in steel corner posts for heavy loads and easy loading and attachment of accessories.
Hydraulics
-Protected electric hydraulic system with battery and powerful charger for a long service life.
-Pumpless emergency pump including a matching socket for convenient and easy tipping with a cordless screwdriver when the battery is low.
Electrics
-Lighting with a 13-pin connector and protected rear lights for long and safe operation of the electrical components.
-Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly durable.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Ksdpfx Aermlzhodysnd
650 mm mesh extension with integrated pendulum bearing in the corner stanchion, 4-sided, ILxIB 3660x2040 mm, type UH, UDK
Aluminum loading ramps, 2560x300 mm, load capacity 2800 kg/pair, and one pair with sturdy pivoting parking supports for 13/14 inch tires
UNSINN plastic tool box, splash-proof, mounted under the loading area, on the right in the direction of travel,
Inner dimensions LxWxH 430x180x188 mm
Frame
-Torsion-resistant longitudinal beam chassis (longitudinal beams continuous from the overrun device to the light bracket) for high directional stability
-Closed, fully welded, and hot-dip galvanized steel frame profile for optimal stability
-Integrated ramp shaft with clamping device and foldable license plate holder for safe and elegant storage of the
loading ramps under the Loading Area
-With maintenance support for securing the tilted deck during maintenance work
Joint Wheel
-Reinforced automatic jockey wheel mounted on a separate crossbeam with a load capacity of 500 kg for safe parking of the trailer
-Maneuvering handle with practical tensioning strap retractor for easy handling
Loading Area & Deck
-Solid steel floor extending across the entire width of the vehicle
-Bridge with the maximum number of crossbeams for particularly high point loads
Load Securing
-Patented Spinlock load securing system for greater flexibility and efficiency in load securing, DEKRA-certified
-Lashing pins recessed into the steel floor, symmetrically distributed
-Lashing pins on and under the loading area, each capable of withstanding loads of up to 1500 daN (kg) and rotatable 360°
-Pot magnet with key ring for removing the lashing pins when the side panel is open
Side Panels
-Solid steel side panels (400 mm), foldable and removable on four sides, with galvanized angle lever locks and an integrated net and tarpaulin strip, powder-coated in black-gray (RAL 7021).
-Four plug-in steel corner posts for heavy loads and easy loading and attachment of accessories.
Hydraulics
-Protected electric hydraulic system with battery and powerful charger for a long service life.
-Pumpless emergency pump including a matching socket for convenient and easy tipping with a cordless screwdriver when the battery is low.
Electrics
-Lighting with a 13-pin connector and protected rear lights for long and safe operation of the electrical components.
-Cable routing in the longitudinal beams of the chassis —> protection from external influences, therefore particularly durable.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2013
تقديم الطلب
الهاتف & فاكس
+49 2952 ... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Lüdersfeld
2.642 km
مقطورة قلابة
SarisKipper K3 306 184 3500 2 E 3,5t Anhänger Black ...
SarisKipper K3 306 184 3500 2 E 3,5t Anhänger Black ...
إعلان صغير
Burghaun-Gruben
2.520 km
مقطورة منخفضة التحميل
BRIAN JAMES TRAILERSCargo Digger Plant 2 / Länge: 3.200mm / 3.500kg
BRIAN JAMES TRAILERSCargo Digger Plant 2 / Länge: 3.200mm / 3.500kg
إعلان صغير
Grevenbroich
2.430 km
مقطورات آلات البناء
Brian James TrailersDigger Plant 2840kg Nutzlast Neu Modell 543-1320 verfügbar ohne Bagger
Brian James TrailersDigger Plant 2840kg Nutzlast Neu Modell 543-1320 verfügbar ohne Bagger
إعلان صغير
Grevenbroich
2.430 km
قلابة 3 اتجاهات
Sarisdirekt heavy duty K3 356 184 3500 2 Elekktro und Notpumpe Alurampen Stützen LED Beleuchtung
Sarisdirekt heavy duty K3 356 184 3500 2 Elekktro und Notpumpe Alurampen Stützen LED Beleuchtung
إعلان صغير
Horn-Bad Meinberg
2.589 km
مقطورة قلابة ثلاثية الاتجاهات
SarisK3 356 184 3500 2 E Bl ED Spez Dreiseitenkipper
SarisK3 356 184 3500 2 E Bl ED Spez Dreiseitenkipper
إعلان صغير
Lüdersfeld
2.642 km
مقطورة قلابة ثلاثية الاتجاهات
SarisKipper K3 356 184 3500 2 HD E 3,5t Anhänger Bla...
SarisKipper K3 356 184 3500 2 HD E 3,5t Anhänger Bla...
إعلان صغير
Grevenbroich
2.430 km
قلابة 3 اتجاهات
SarisK3 356 184 3500 2 Elektro Blattfederung 3500kg
SarisK3 356 184 3500 2 Elektro Blattfederung 3500kg
إعلان صغير
Grevenbroich
2.430 km
مقطورة قلابة ثلاثية الاتجاه
SarisK 3 356 184 35 2 3500 E Rampen Stützen Neu
SarisK 3 356 184 35 2 3500 E Rampen Stützen Neu
تم حذف إعلانك بنجاح
حدث خطأ




































































































































