مقطورة مع منصة عملMÜLLER-MITTELTAL
11,9 to Tandemtieflader mit Auffahrrampen
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
11,9 to Tandemtieflader mit Auffahrrampen
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
24.950 €
(29.690 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
24.950 €
(29.690 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, Deutschland

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
11.900 كجم
الوزن الأقصى للحمولة:
8.870 كجم
طول مساحة التحميل:
6.270 مم
عرض مساحة التحميل:
2.470 مم
ارتفاع مساحة التحميل:
400 مم
محاور وعجلات
تكوين المحور:
محورين
تفاصيل العرض
- معرّف الإعلان:
- A145-49-752
- رقم المرجع:
- 58531
- تحديث:
- آخر مرة في 19.11.2026
وصف
* ETÜ-TA-R 11.9:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5-ton BPW axles
----Suspension:
* Parabolic springs with equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm
* 40 mm flange coupling
----General components:
* Jost support leg at the front
* External, hot-dip galvanized folding support legs at the rear
* Plastic quarter fenders
* Plastic toolbox on the front right, on the front panel
----Electrical system / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading area:
* Loading area 6.27 m
* Suitable for container transport
* 50 mm softwood floor
* Device for the subsequent installation of container locking mechanisms in front of the front panel
* Bolted front panel made of smooth sheet metal
* Trapezoidally profiled, foldable side walls made of steel sheet, with sideboard spring supports
* Steel rear panel, retractable between the ramp supports when not in use, located inside in front of the front panel
* Rear supports bolted on
----Load securing:
* Perforated outer frame, angled at approximately 45 degrees, with 2-ton lashing force every 480 mm
* Installation of 3-ton drop-side lashing brackets possible every 600 mm
* 1 x 6.3-ton lashing point each in the corners at the front and rear
* Various holes in the front and end beams for 1.2-ton lashing options
----Ramps:
* One-piece mechanical loading ramps with spring mechanism for single-person operation, approximately 2,750 x 600 mm (can be retracted to 20 mm)
* Approach angle at the rear, approximately 860 mm
Kdsdpfx Agoq Ra D Eo Asw
----Tires:
* Tires: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front panel, rear panel, rear supports, and loading ramps
* Painting of the sideboards in RAL 9010 pure white
* Painting of the side walls in a RAL color at an additional cost
----Information:
* Errors and prior sale reserved
* New vehicle with manufacturer's warranty
----Delivery time:
* Available from approximately week 06/2027
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5-ton BPW axles
----Suspension:
* Parabolic springs with equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm
* 40 mm flange coupling
----General components:
* Jost support leg at the front
* External, hot-dip galvanized folding support legs at the rear
* Plastic quarter fenders
* Plastic toolbox on the front right, on the front panel
----Electrical system / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading area:
* Loading area 6.27 m
* Suitable for container transport
* 50 mm softwood floor
* Device for the subsequent installation of container locking mechanisms in front of the front panel
* Bolted front panel made of smooth sheet metal
* Trapezoidally profiled, foldable side walls made of steel sheet, with sideboard spring supports
* Steel rear panel, retractable between the ramp supports when not in use, located inside in front of the front panel
* Rear supports bolted on
----Load securing:
* Perforated outer frame, angled at approximately 45 degrees, with 2-ton lashing force every 480 mm
* Installation of 3-ton drop-side lashing brackets possible every 600 mm
* 1 x 6.3-ton lashing point each in the corners at the front and rear
* Various holes in the front and end beams for 1.2-ton lashing options
----Ramps:
* One-piece mechanical loading ramps with spring mechanism for single-person operation, approximately 2,750 x 600 mm (can be retracted to 20 mm)
* Approach angle at the rear, approximately 860 mm
Kdsdpfx Agoq Ra D Eo Asw
----Tires:
* Tires: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front panel, rear panel, rear supports, and loading ramps
* Painting of the sideboards in RAL 9010 pure white
* Painting of the side walls in a RAL color at an additional cost
----Information:
* Errors and prior sale reserved
* New vehicle with manufacturer's warranty
----Delivery time:
* Available from approximately week 06/2027
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
158 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
ناجح
تم إرسال رسالتك.
إعلان صغير
Langelsheim
2.651 km
هوك لودر
MAN26.430 6x2 Retarder Meiller RK 20.70
MAN26.430 6x2 Retarder Meiller RK 20.70
ناجح
تم إرسال رسالتك.
إعلان صغير
Nürnberg
2.482 km
الجرافة ذات العجلات كلها موجهة بسرعة 20 كم/ساعة
MECALACAF1050
MECALACAF1050
ناجح
تم إرسال رسالتك.
إعلان صغير
Diespeck
2.469 km
هوك لودر
MAN26.403 FL 6x2
MAN26.403 FL 6x2
ناجح
تم إرسال رسالتك.
إعلان صغير
Peine
2.683 km
شاحنة قلّابة بذراع تحميل متحرك
ANDERE
ANDERE
تم حذف إعلانك بنجاح
حدث خطأ



































































































