مقطورة منخفضة التحميل

MÜLLER-MITTELTAL 21 to luftgef. Tandemtieflader mit 3 mtr Rampen

ETÜ-TA-R 21.0:

Codpfx Aeq Dyu Uentjha
----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes

----Axles:

* 2 x 11 ton Gigant axles

----Suspension:

* Air suspension with lifting and lowering system

----Drawbar / Flange coupling:

* Drawbar with 50 mm flange coupling and height-adjustable drawbar

----Lighting / Electrical system:

* 15-pin power connector
* LED lights 12/24 V
* TPMS (tire pressure monitoring system)

----General components:

* Jost support legs (front)
* Outboard folding supports (rear)
* Plastic tool box approx. 750 x 350 x 300 mm on the right side
* Side impact protection
* Plastic quarter fenders

----Low-loader platform:

* In front of the front wall and rear slope, provision for subsequent installation of container locking mechanisms for the transport of 20" containers
* Design for 21 tons GVW with reinforced frame and reinforced axles
* Reinforcement package for drilling equipment transport on the chassis
* 50 mm softwood flooring in a clamped design
* In front of the front wall, provision for subsequent installation of container locking mechanisms
* Bolted front wall made of smooth sheet metal
* Divided side walls made of steel sheet - trapezoid-profiled - foldable with a folding mechanism in the center
* Steel rear wall can be slid in between the ramps - bracket for storage when not in use inside the front wall
* Rear rails bolted

----Load securing:

* Perforated outer frame angled approx. 45 degrees with 2-ton lashing force every 480 mm
* Installation of 3-ton drop-side lashing brackets possible every 600 mm
* Profifix lashing bar in the longitudinal axis in the center for lashing capability up to LC 3000 daN
* In the corners, front and rear, 1 x 10-ton lashing points each
* Lasi package with 2 x 8-ton lashing rings each on the sides, recessed in the outer frame, various holes in the front and end cross members for 1.2-ton lashing capability

----Ramps:

* One-piece mechanical grating access ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be slid together to 20 mm)
* Approach angle at the rear approx. 860 mm chassis

----Loading heights:

* Unloaded approx. 940 mm
* Loaded approx. 910 mm

----Wheelbase / Tires:

* 1,810 mm
* Tires: 235/75R17.5

----Painting:

* Painting of the side walls in RAL 9010 pure white
* Drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized
* Axles, springs, air tanks and support legs painted in a black tone

----Information:

* New vehicle with manufacturer's warranty
* Errors and prior sale are subject to change

----Delivery time:

* Available for immediate delivery from Egestorf

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.