مقطورة قلابة ثلاثية الاتجاهاتMÜLLER-MITTELTAL
11,9 to. Kipper/ Rampen, 1 mtr Gitteraufsätze
مقطورة قلابة ثلاثية الاتجاهات
MÜLLER-MITTELTAL
11,9 to. Kipper/ Rampen, 1 mtr Gitteraufsätze
سعر ثابت دون ضريبة القيمة المضافة
29.450 €
(35.046 € إجمالي)
سنة الصنع
2024
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
29.450 €
(35.046 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 8.450 كجم
- الوزن الإجمالي:
- 11.900 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.000 مم
- عرض مساحة التحميل:
- 22.420 مم
- ارتفاع مساحة التحميل:
- 1.500 مم
تفاصيل العرض
- معرّف القائمة:
- A134-70-013
- الرقم المرجعي:
- 6013 a
- التحديث الأخير:
- في ٢٥.٠٦.٢٠٢٥
الوصف
* KA-TA-R 11.9 Masterline:
* incl. 1 mtr grid attachments
* EBS brake system
* Emergency release device for spring brake cylinders
* RDÜ tire pressure monitoring
* Drum brakes
* 2 x 5.5 to. BPW axles
* Parabolic springs with tandem compensation unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye
* Jost mech. support winch at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* Tool box made of galvanized sheet steel on the right side
* 15-pin power plug
* Bolted underride guard with LED tail lights
* Plastic quarter mudguards
* Mesh hooks at the side and rear in the bearings of the central locking system and 3 pieces on the outside of the bulkhead
* Hot-dip galvanized chassis
* Fully galvanized steel Pal. 3 side tipper body
* Full-length side walls without central stanchion can be folded down with dropside spring lifter
* Tailgate can be folded down and swung open via man. Central locking
* hot-dip galvanized bolted rear stanchion
* 1 x 5 to. lashing ring in each corner Lashing ring recessed and foldable in each corner and 4 x 3 tons at each side.
* Lashing rings recessed in the outer frame and hinged
* 4 mm sheet steel floor
* Rear mounting rail for feeder ramps
* Reinforced body with load securing certificate to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,570 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles
* Storage compartment lockable from the rear under the loading area recessed in the chassis
Bodpfx Asp Ncl Secwedi
* 235/75 R 17.5 tires
* Axles, springs, air reservoir, drawbar and support winch painted black
* Hot-dip galvanized side wall paint
* 1 metre galvanized grid attachments
* Sample pictures
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* incl. 1 mtr grid attachments
* EBS brake system
* Emergency release device for spring brake cylinders
* RDÜ tire pressure monitoring
* Drum brakes
* 2 x 5.5 to. BPW axles
* Parabolic springs with tandem compensation unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye
* Jost mech. support winch at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* Tool box made of galvanized sheet steel on the right side
* 15-pin power plug
* Bolted underride guard with LED tail lights
* Plastic quarter mudguards
* Mesh hooks at the side and rear in the bearings of the central locking system and 3 pieces on the outside of the bulkhead
* Hot-dip galvanized chassis
* Fully galvanized steel Pal. 3 side tipper body
* Full-length side walls without central stanchion can be folded down with dropside spring lifter
* Tailgate can be folded down and swung open via man. Central locking
* hot-dip galvanized bolted rear stanchion
* 1 x 5 to. lashing ring in each corner Lashing ring recessed and foldable in each corner and 4 x 3 tons at each side.
* Lashing rings recessed in the outer frame and hinged
* 4 mm sheet steel floor
* Rear mounting rail for feeder ramps
* Reinforced body with load securing certificate to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,570 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles
* Storage compartment lockable from the rear under the loading area recessed in the chassis
Bodpfx Asp Ncl Secwedi
* 235/75 R 17.5 tires
* Axles, springs, air reservoir, drawbar and support winch painted black
* Hot-dip galvanized side wall paint
* 1 metre galvanized grid attachments
* Sample pictures
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ












