مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
29.900 €
(35.581 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
29.900 €
(35.581 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.900 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف الإعلان:
- A128-69-180
- رقم المرجع:
- 6158
- تحديث:
- آخر مرة في ١٩.٠٢.٢٠٢٦
وصف
ETÜ-TA-R 14.4
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
Njdpfx Acjpk Dv Rewokw
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged Towing Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox mounted front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation for the retrofit of container locks in front of the front wall
* Bolted smooth steel front wall
* Fold-down sidewalls made from trapezoidal steel sheeting with board hoist
* Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use
* Bolted rear stakes
* Rear slope approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each of the front and rear corners
* Various 1.2 t lashing options in the front and rear cross-members
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Sideboard color in RAL 9010 pure white
* Sidewall painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
----Brakes:
* EBS electronic braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
Njdpfx Acjpk Dv Rewokw
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Drawbar / Flanged Towing Eye:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, total length 2,250 mm
* 40 mm flanged towing eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox mounted front right on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation for the retrofit of container locks in front of the front wall
* Bolted smooth steel front wall
* Fold-down sidewalls made from trapezoidal steel sheeting with board hoist
* Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use
* Bolted rear stakes
* Rear slope approx. 860 mm
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each of the front and rear corners
* Various 1.2 t lashing options in the front and rear cross-members
----Ramps:
* Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps
* Sideboard color in RAL 9010 pure white
* Sidewall painting in another RAL color available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex works Egestorf
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
180 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ
























































