مقطورة منخفضة التحميلMÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
سعر ثابت دون ضريبة القيمة المضافة
32.950 €
(39.210 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
32.950 €
(39.210 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.360 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A116-45-309
- الرقم المرجعي:
- 6159
- التحديث الأخير:
- في ٠٥.٠٢.٢٠٢٦
الوصف
* ETÜ-TA-ER 14.4:
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
Ihedpfxendpn Sj Ac Nsu
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
Ihedpfxendpn Sj Ac Nsu
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ









































































