مقطورة مع منصة عملMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
سعر ثابت دون ضريبة القيمة المضافة
35.900 €
(42.721 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
35.900 €
(42.721 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, Deutschland

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 14.400 كجم
- الوزن الإجمالي:
- 19.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A107-46-176
- الرقم المرجعي:
- 61601
- التحديث الأخير:
- في ٠٨.٠١.٢٠٢٦
الوصف
* ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate
* Jost front landing gear
* Outward folding rear supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electric connector
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fixture in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center
* Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use
* Rear posts bolted
* Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t drop-forged lashing brackets every 600 mm possible
Giodpfx Agjmi Tmaorol
* Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options
* One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear loading slope approx. 860 mm
* Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized
* --- Axles, air tank, flanged towing eye, and landing gear painted in black tone ---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Wabco EBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate
* Jost front landing gear
* Outward folding rear supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electric connector
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fixture in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center
* Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use
* Rear posts bolted
* Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t drop-forged lashing brackets every 600 mm possible
Giodpfx Agjmi Tmaorol
* Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options
* One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear loading slope approx. 860 mm
* Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized
* --- Axles, air tank, flanged towing eye, and landing gear painted in black tone ---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
إعلان صغير
Twist
2.594 km
مقطورة بهيكل قابل للتبديل
WEB-TRAILERWechselanhänger 235/75 R17.5 / 970 - 1220mm
WEB-TRAILERWechselanhänger 235/75 R17.5 / 970 - 1220mm
إعلان صغير
Egestorf
2.751 km
مقطورة رول آف
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
إعلان صغير
Sittensen
2.738 km
وحدة جر ذات حجم كبير
MAN18.580 TGX LL XXL 4x2, Hydr., Intarder, Klima
MAN18.580 TGX LL XXL 4x2, Hydr., Intarder, Klima
إعلان صغير
Egestorf
2.752 km
مقطورة مع منصة عمل
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
تم حذف إعلانك بنجاح
حدث خطأ




















































































































































