مقطورة منخفضة التحميلMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Luftfed.
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstiel, Luftfed.
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
47.950 €
(57.060 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
47.950 €
(57.060 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 23.700 كجم
- الوزن الإجمالي:
- 30.000 كجم
- تكوين المحور:
- 3 محاور
تفاصيل العرض
- معرّف الإعلان:
- A104-34-320
- رقم المرجع:
- 5902
- تحديث:
- آخر مرة في ٠٦.٠٥.٢٠٢٦
وصف
* T3 Profi 30.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with raising/lowering function and RtR valve
* Smart-Board as infotool
* Lateral underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* FRP full front wheel arches and rear straight galvanized steel skirts, both with splash protection
* Reflective contour tape at sides and rear
* Foldable (hot-dip galvanized) toolbox lid on the bogie platform
* LED rear lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin power connector
* Four stake pockets per side, each with 2 t lashing capability
* Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the frame of the bogie platform, 5 pairs of UVV lashing rings—swiveling and lowerable, loadable in all directions, recessed into the outer frame—corners rated 13.4 t, elsewhere 10 t
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope)
* Extension planks stowed in the loading area center
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Excavator arm rest over rear axle up to end crossbeam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach ramp)
* Chassis, bogie, drawbar, folding extensions, and loading ramps hot-dip galvanized
* Axles, turntable, air tanks, etc. painted in black
* Tires: 235/75 R 17.5
Bsdpsl Tq Eujfx Aiqjwn
* Payload approx. 24,000 kg with 30,000 kg gross weight
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Available from approx. week 32 / 2026
* Sample images
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Air suspension with raising/lowering function and RtR valve
* Smart-Board as infotool
* Lateral underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* FRP full front wheel arches and rear straight galvanized steel skirts, both with splash protection
* Reflective contour tape at sides and rear
* Foldable (hot-dip galvanized) toolbox lid on the bogie platform
* LED rear lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle
* 15-pin power connector
* Four stake pockets per side, each with 2 t lashing capability
* Load securing package includes: 2 lashing eyes (6.4 t) front left & right on the frame of the bogie platform, 5 pairs of UVV lashing rings—swiveling and lowerable, loadable in all directions, recessed into the outer frame—corners rated 13.4 t, elsewhere 10 t
* 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope)
* Extension planks stowed in the loading area center
* Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable
* Excavator arm rest over rear axle up to end crossbeam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach ramp)
* Chassis, bogie, drawbar, folding extensions, and loading ramps hot-dip galvanized
* Axles, turntable, air tanks, etc. painted in black
* Tires: 235/75 R 17.5
Bsdpsl Tq Eujfx Aiqjwn
* Payload approx. 24,000 kg with 30,000 kg gross weight
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Available from approx. week 32 / 2026
* Sample images
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
170 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ

























