مقطورة مع منصة عملMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
سعر ثابت دون ضريبة القيمة المضافة
33.500 €
(39.865 € إجمالي)
سنة الصنع
2023
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
33.500 €
(39.865 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, DE

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 14.200 كجم
- الوزن الإجمالي:
- 19.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 7.000 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A104-33-237
- الرقم المرجعي:
- 60281
- التحديث الأخير:
- في ٢٥.٠٦.٢٠٢٥
الوصف
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
Chedpfjl Tp Azsx Acwsd
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
Chedpfjl Tp Azsx Acwsd
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ











































