مقطورة منخفضة التحميلMÜLLER-MITTELTAL
11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
سعر ثابت دون ضريبة القيمة المضافة
24.750 €
(29.452 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
24.750 €
(29.452 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 8.800 كجم
- الوزن الإجمالي:
- 11.900 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.370 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A104-27-234
- الرقم المرجعي:
- 6056
- التحديث الأخير:
- في ٠٧.٠١.٢٠٢٦
الوصف
* ETÜ-TA-R 11.9:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at front
* External foldable support legs at rear
* Plastic toolbox on the front right outside, mounted on the bulkhead
* Side underrun protection
Dodpfxsl Th Nco Ac Eoul
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (tire pressure monitoring system)
* LED lighting
----Loading Platform:
* Loading area 5.37 m
* 50 mm softwood floor
* Bolt-on bulkhead made of flat sheet metal
* Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist
* Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* In each front and rear corner, one lashing ring, 6.3 t each
* Various holes in the bulkhead and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm from chassis
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade
* Side wall paintwork in RAL2011 deep orange
* Custom color paintwork for side panels available for an additional charge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at front
* External foldable support legs at rear
* Plastic toolbox on the front right outside, mounted on the bulkhead
* Side underrun protection
Dodpfxsl Th Nco Ac Eoul
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (tire pressure monitoring system)
* LED lighting
----Loading Platform:
* Loading area 5.37 m
* 50 mm softwood floor
* Bolt-on bulkhead made of flat sheet metal
* Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist
* Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use
* Rear stakes bolted
----Load Securing:
* Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* In each front and rear corner, one lashing ring, 6.3 t each
* Various holes in the bulkhead and rear crossmember for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach angle approx. 860 mm from chassis
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade
* Side wall paintwork in RAL2011 deep orange
* Custom color paintwork for side panels available for an additional charge
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately from Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ








































