مقطورة مع منصة عملMÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampe NEU
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
29.950 €
(35.640 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
29.950 €
(35.640 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, Deutschland

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 14.660 كجم
- الوزن الإجمالي:
- 18.000 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف الإعلان:
- A104-27-186
- رقم المرجع:
- 58341
- تحديث:
- آخر مرة في ١٤.٠٢.٢٠٢٦
وصف
* ETÜ-TA-R 19.0:
* Wabco EBS brake system
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
Nksdpfx Ael Th Hwecwsw
* 2 x 10-ton BPW Eco axles
* Parabolic springs -110 mm wide- with tandem equalizer
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* Exterior folding supports at the rear
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood floor
* Fixture in front of the bulkhead for optional retrofitting of container locks
* Bolted smooth sheet steel front wall
* Side walls made of steel sheet - trapezoidal profiled, foldable with drop-side spring assist
* Steel rear wall, insertable between the ramps - bracket for storage inside at the front wall when not in use
* Bolt-on rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2-ton lashing capacity every 480 mm
* Optional installation of 3-ton retractable lashing rings every 600 mm
* 1 x 10-ton lashing ring in each of the front and rear corners, various bores in the front and rear crossmembers for additional 1.2-ton lashing options
* Profifix lashing rail longitudinally centered, for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Drop sides painted in RAL 9010 pure white
* Optional painting of side panels in an RAL color for an extra charge
* Axles, springs, air tank, flange eye, and landing gear painted in black
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
* Available approx. from week 21/2026
* Sample images
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
* Wabco EBS brake system
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
Nksdpfx Ael Th Hwecwsw
* 2 x 10-ton BPW Eco axles
* Parabolic springs -110 mm wide- with tandem equalizer
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* Exterior folding supports at the rear
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* 50 mm softwood floor
* Fixture in front of the bulkhead for optional retrofitting of container locks
* Bolted smooth sheet steel front wall
* Side walls made of steel sheet - trapezoidal profiled, foldable with drop-side spring assist
* Steel rear wall, insertable between the ramps - bracket for storage inside at the front wall when not in use
* Bolt-on rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2-ton lashing capacity every 480 mm
* Optional installation of 3-ton retractable lashing rings every 600 mm
* 1 x 10-ton lashing ring in each of the front and rear corners, various bores in the front and rear crossmembers for additional 1.2-ton lashing options
* Profifix lashing rail longitudinally centered, for lashing capacity up to LC 3000 daN
* One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Drop sides painted in RAL 9010 pure white
* Optional painting of side panels in an RAL color for an extra charge
* Axles, springs, air tank, flange eye, and landing gear painted in black
* New vehicle with full manufacturer's warranty
* Subject to errors and prior sale
* Available approx. from week 21/2026
* Sample images
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
180 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ






























