مقطورة مفتوحةMÜLLER-MITTELTAL
        Tandemtieflader, Lufrfederung, Gitterrostrampen    
 مقطورة مفتوحة
MÜLLER-MITTELTAL
        Tandemtieflader, Lufrfederung, Gitterrostrampen    
                                                     سعر ثابت دون ضريبة القيمة المضافة                                            
                                            29.900 €                                    
                        (35.581 € إجمالي)                    
                سنة الصنع            
                2025            
            الحالة        
            جديد                    
            الموقع        
                                                Egestorf                                            

 عرض الصور            
 عرض الخريطة            
البيانات الأساسية
السعر والموقع
                             سعر ثابت دون ضريبة القيمة المضافة                    
                            29.900 €                    
                (35.581 € إجمالي)            
- موقع البائع:
-     Eichenstich 12, 21272 Egestorf, ألمانيا             
 اتصل            
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 10.500 كجم
- الوزن الإجمالي:
- 14.400 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 7.000 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A104-27-108
- الرقم المرجعي:
- 6285a
- التحديث الأخير:
- في ٠٨.٠٧.٢٠٢٥
الوصف
        * EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
Rodpfx Ael Th Dfegcech
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
Rodpfx Ael Th Dfegcech
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
            ملاحظة:        سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.    
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
                            +49 40 33... إعلانات                
 قد تهمك أيضًا هذه الإعلانات.
            تم حذف إعلانك بنجاح            
            حدث خطأ            

















































