مقطورة منخفضة التحميلMÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
سعر ثابت دون ضريبة القيمة المضافة
43.500 €
(51.765 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
43.500 €
(51.765 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا
اتصل
تفاصيل فنية
- الوزن الإجمالي:
- 30.000 كجم
- الوزن الأقصى للحمولة:
- 23.830 كجم
- تكوين المحور:
- 3 محاور
- طول مساحة التحميل:
- 8.460 مم
- عرض مساحة التحميل:
- 2.520 مم
تفاصيل العرض
- معرّف القائمة:
- A104-27-075
- الرقم المرجعي:
- 6098
- التحديث الأخير:
- في ٠١.١٠.٢٠٢٥
الوصف
* T3 Profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swing-type supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection
* Reflective contour tape on the sides and rear
* Folding lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (no stakes included), each with integrated lashing points
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in the corners 13.4 t, otherwise 10 t
Kdodpfxsl Th Adj Acvou
* 6 pairs of mechanical foldable outriggers for 3 m total width (not in the rear slope)
* Widening planks stored in the center of the loading area
* Excavator boom rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted on the sides)
* One-piece hydraulic ramps (approx. 3,000 x 720 mm), adjustable laterally
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible gross weight technically up to 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available from week 38/2025
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Swing-type supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection
* Reflective contour tape on the sides and rear
* Folding lid (hot-dip galvanized) for the toolbox on the bogie platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin electrical connector
* Four stake pockets on each side (no stakes included), each with integrated lashing points
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – in the corners 13.4 t, otherwise 10 t
Kdodpfxsl Th Adj Acvou
* 6 pairs of mechanical foldable outriggers for 3 m total width (not in the rear slope)
* Widening planks stored in the center of the loading area
* Excavator boom rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings mounted on the sides)
* One-piece hydraulic ramps (approx. 3,000 x 720 mm), adjustable laterally
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks, etc. painted in black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* --Permissible gross weight technically up to 30,000 kg--
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available from week 38/2025
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير

2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp
تم حذف إعلانك بنجاح
حدث خطأ