مقطورة مع منصة عملMÜLLER-MITTELTAL
11,9 to. Tand-Tiefl. / Einschubrampen verzinkt
مقطورة مع منصة عمل
MÜLLER-MITTELTAL
11,9 to. Tand-Tiefl. / Einschubrampen verzinkt
سعر ثابت دون ضريبة القيمة المضافة
27.500 €
(32.725 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Egestorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
27.500 €
(32.725 € إجمالي)
- الموقع:
- Eichenstich 12, 21272 Egestorf, Deutschland

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 8.870 كجم
- الوزن الإجمالي:
- 11.900 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- ارتفاع مساحة التحميل:
- 400 مم
تفاصيل العرض
- معرّف القائمة:
- A104-27-036
- الرقم المرجعي:
- 5769
- التحديث الأخير:
- في ٠٧.٠١.٢٠٢٦
الوصف
* ETÜ-TA-ER 11.9:
----Brake system:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle system
----Suspension:
* Parabolic leaf springs with equalizing aggregate
----Drawbar / Flange towing eye:
Bjdpfxel Thy Re Abpocu
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange towing eye
----General attachments:
* Jost mechanical support landing gear at the front
* Rear external foldable support legs, hot-dip galvanized
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox mounted front-right on the bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Loading area:
* 50 mm softwood floor
* 20" container locks fitted at front and rear
* Front bulkhead bolted, made from smooth sheet metal
* Drop sides made from trapezoidal-profiled steel, foldable with tailgate spring assist
* Rear stanchions, hot-dip galvanized and bolted
----Load securing:
* Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t folding lashing brackets every 600 mm (each side fitted with 5 lashing rings)
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross beams for 1.2 t lashing options
----Ramps:
* 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for pneumatic-tyred and tracked vehicles
* Rear stowage compartment beneath the loading platform, integrated in the chassis
----Paint/Coating:
* Chassis, drawbar, front and rear bulkheads hot-dip galvanized
* Side board color RAL 9010 pure white
* Sides can be painted in any RAL color at extra cost
----Additional information:
* New vehicle without registration
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
----Brake system:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle system
----Suspension:
* Parabolic leaf springs with equalizing aggregate
----Drawbar / Flange towing eye:
Bjdpfxel Thy Re Abpocu
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange towing eye
----General attachments:
* Jost mechanical support landing gear at the front
* Rear external foldable support legs, hot-dip galvanized
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox mounted front-right on the bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
----Loading area:
* 50 mm softwood floor
* 20" container locks fitted at front and rear
* Front bulkhead bolted, made from smooth sheet metal
* Drop sides made from trapezoidal-profiled steel, foldable with tailgate spring assist
* Rear stanchions, hot-dip galvanized and bolted
----Load securing:
* Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t folding lashing brackets every 600 mm (each side fitted with 5 lashing rings)
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross beams for 1.2 t lashing options
----Ramps:
* 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for pneumatic-tyred and tracked vehicles
* Rear stowage compartment beneath the loading platform, integrated in the chassis
----Paint/Coating:
* Chassis, drawbar, front and rear bulkheads hot-dip galvanized
* Side board color RAL 9010 pure white
* Sides can be painted in any RAL color at extra cost
----Additional information:
* New vehicle without registration
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
تقديم الطلب
الهاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
إعلان صغير
Bad Lippspringe
2.574 km
مسطحة / مشمع
MERCEDES-BENZSprinter 317 CDI Pritsche Plane/ LBW
MERCEDES-BENZSprinter 317 CDI Pritsche Plane/ LBW
إعلان صغير
Egestorf
2.751 km
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
إعلان صغير
Roosendaal
2.393 km
منصة التحميل
GSAN- 2000 + 2 AXLE
GSAN- 2000 + 2 AXLE
تم حذف إعلانك بنجاح
حدث خطأ







































































