مقطورة منخفضة التحميلMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
مقطورة منخفضة التحميل
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
27.900 €
(33.201 € إجمالي)
سنة الصنع
2026
الحالة
جديد
الموقع
Egestorf 

البيانات الأساسية
السعر والموقع
سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
27.900 €
(33.201 € إجمالي)
- موقع البائع:
- Eichenstich 12, 21272 Egestorf, ألمانيا

اتصل
تفاصيل فنية
- الوزن الأقصى للحمولة:
- 8.650 كجم
- الوزن الإجمالي:
- 11.900 كجم
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 5.000 مم
- عرض مساحة التحميل:
- 2.420 مم
- ارتفاع مساحة التحميل:
- 500 مم
تفاصيل العرض
- معرّف الإعلان:
- A104-26-970
- رقم المرجع:
- 61561
- تحديث:
- آخر مرة في 11.06.2026
وصف
* KA-TA-R 11.9 Masterline
----Brakes:
* Wabco EBS
Hsdpfel Thw Isx Acljfh
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensator unit
----Drawbar / Flange Drawbar Eye:
* Drawbar adjustable in height by approx. 300 mm with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire monitoring system
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General Accessories:
* Mechanical support winch at the front
* 2 mechanical folding supports at the rear
* Side-mounted plastic toolbox on the right
* Two-step entry front left in direction of travel
* Bolt-on underrun protection
* Plastic quarter mudguards
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking mounts, as well as 2 on the front wall
* Steel pallet 3-way tipper body (continuous side walls, no central stanchions), folding side walls with board wall spring lifters, rear flap foldable and swinging, lockable via manual central locking
* 4 mm steel plate floor
* Rear ramp mounting rail
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing points recessed in external frame on each side
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable rear compartment under the loading platform integrated into chassis
----Tires:
* Tires: 385/55 R 19.5
----Painting:
* Chassis, drawbar, tipping body, front wall, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tanks, flange drawbar eye, and support winch painted black
* Side board painting in customer's RAL color of choice (excluding special or metallic paints), changeable up to approx. 6 weeks before completion
----Info:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery time:
* Available from approx. week 28 / 2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
----Brakes:
* Wabco EBS
Hsdpfel Thw Isx Acljfh
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensator unit
----Drawbar / Flange Drawbar Eye:
* Drawbar adjustable in height by approx. 300 mm with 40 mm flange drawbar eye
----Electrics / Lighting:
* RDÜ tire monitoring system
* Multivoltage
* 15-pin power connector
* 12V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General Accessories:
* Mechanical support winch at the front
* 2 mechanical folding supports at the rear
* Side-mounted plastic toolbox on the right
* Two-step entry front left in direction of travel
* Bolt-on underrun protection
* Plastic quarter mudguards
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking mounts, as well as 2 on the front wall
* Steel pallet 3-way tipper body (continuous side walls, no central stanchions), folding side walls with board wall spring lifters, rear flap foldable and swinging, lockable via manual central locking
* 4 mm steel plate floor
* Rear ramp mounting rail
----Load Securing:
* 1 x 5 t lashing ring in each corner
* 4 x 3 t lashing points recessed in external frame on each side
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles
* Lockable rear compartment under the loading platform integrated into chassis
----Tires:
* Tires: 385/55 R 19.5
----Painting:
* Chassis, drawbar, tipping body, front wall, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tanks, flange drawbar eye, and support winch painted black
* Side board painting in customer's RAL color of choice (excluding special or metallic paints), changeable up to approx. 6 weeks before completion
----Info:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery time:
* Available from approx. week 28 / 2026
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2001
168 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 40 33... إعلانات
قد تهمك أيضًا هذه الإعلانات.
تم حذف إعلانك بنجاح
حدث خطأ





























































