شبه مقطورة بأرضية متحركة

STAS Schubboden 13.50 "BioStar"

-Panama Plane 900g
-10 mm floor
-V-shaped sheet metal 2000x1500x4
-Service door on the front panel
-12 pairs of lashing eyes on the front panel

Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design

Kodpfx Aaefi Nmpjhodt
Axle and suspension: Disc brake 22.5
Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment)

Tires and wheels:
6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120

Kingpin:
Mechanical support winch, 2x20 tons support load

Braking system:
EBS E system Wabco with RSS system
(Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear

Electrical system:
According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design
2 separate LED reversing lights integrated in the U-shaped protection,

Body/tipper bed: "Body fully welded inside", reinforced side walls
Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles
(2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal

Hydraulic system: "Cargo Floor" sliding floor system
Sliding floor system in the floor with hydraulically moved aluminum profiles
on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses

Accessories:
6 PVC mudguards with 2 anti-spray mud flaps,
1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc.

+590¤ Delivery costs

Unladen weight: approx. 7,700 kg

Offer and images subject to change.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.