شبه مقطورة بمنصة عملES-GE
3-Achs Sattelanhänger - Bordwände + CV
شبه مقطورة بمنصة عمل
ES-GE
3-Achs Sattelanhänger - Bordwände + CV
الحالة
جديد
الموقع
Essen 

البيانات الأساسية
السعر والموقع
- موقع البائع:
- Heegstraße 6-8, 45356 Essen, ألمانيا

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
43.000 كجم
الوزن الأقصى للحمولة:
35.440 كجم
محاور وعجلات
تكوين المحور:
3 محاور
ميزات الأمان
نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل العرض
- معرّف الإعلان:
- A233-66-668
- رقم المرجع:
- 36622
- تحديث:
- آخر مرة في 21.11.2026
وصف
You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.
Kdjdpfx As Aldapeg Ajw
Excerpt from the equipment:
Complete equipment available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.
Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.
Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.
Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.
Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.
Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Lighting system
* According to EC, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.
Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
Kdjdpfx As Aldapeg Ajw
Excerpt from the equipment:
Complete equipment available upon request.
Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.
Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.
Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.
Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.
Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.
Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.
Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.
Lighting system
* According to EC, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.
Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.
Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.
Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng
تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2003
68 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 201 8... إعلانات
قد تهمك أيضًا هذه الإعلانات.
ناجح
تم إرسال رسالتك.
إعلان صغير
Essen
2.475 km
شبه مقطورة بمنصة عمل
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ناجح
تم إرسال رسالتك.
إعلان صغير
Essen
2.475 km
شبه مقطورة بمنصة عمل
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ناجح
تم إرسال رسالتك.
إعلان صغير
Essen
2.475 km
شبه مقطورة بمنصة عمل
ES-GE3-Achs Sattelanhänger - Bordwände + CV
ES-GE3-Achs Sattelanhänger - Bordwände + CV
تم حذف إعلانك بنجاح
حدث خطأ



































