مقطورة نصف مفتوحةFliegl
SDS 350 Mega
مقطورة نصف مفتوحة
Fliegl
SDS 350 Mega
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
10.500 €
(12.495 € إجمالي)
الحالة
مستعمل
(يعمل بكامل كفاءته)
الموقع
Triptis 

البيانات الأساسية
- تسمية:
- مقطورة نصف مفتوحة
- الشركة المصنعة:
- Fliegl
- طراز:
- SDS 350 Mega
- رقم المركبة:
- WFDFLT23002024348
- الحالة:
- مستعمل
- الوظائف:
- يعمل بكامل كفاءته
السعر والموقع
EXW سعر ثابت بالإضافة إلى ضريبة القيمة المضافة
10.500 €
(12.495 € إجمالي)
- الموقع:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

اتصل
تفاصيل فنية
الأبعاد والوزن
الوزن الإجمالي:
39.000 كجم
وزن فارغ:
5.865 كجم
الوزن الأقصى للحمولة:
33.135 كجم
الطول الكلي:
13.850 مم
العرض الكلي:
2.550 مم
الارتفاع الكلي:
1.820 مم
محاور وعجلات
تكوين المحور:
3 محاور
تعليق:
هواء
مقاس الإطار:
435/50 R19,5"
حالة الإطارات:
49 نسبة مئوية
التوثيق والشهادة
الفحص القادم (TÜV):
04/2027
مزيد من التفاصيل
التسجيل الأول:
12/2018
تفاصيل العرض
- معرّف الإعلان:
- A233-58-848
- رقم المرجع:
- 49397
- تحديث:
- آخر مرة في 19.11.2026
وصف
# Chassis / Frame
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
Itedpfxj Ak Npae Afhep
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.
- Welded fine-grain steel construction, fifth wheel plate with replaceable 2" kingpin.
- Full-width rear ramp attachment rail for aluminium ramps. Suitable for loading construction machinery up to 8,000 kg gross weight and 2,500 mm width. Loading ramps must only be used with rear stabilisers deployed!
- Slightly angled outer frame with Load-Lock profile for lashing strap attachment. With side boards fitted, the side boards must be opened to attach straps.
- 24-tonne, 2-speed landing gear, single-side operation, straight lower section, without thrust compensation.
- Folding rear stabilisers, wheel chocks with holders, aluminium side underrun protection, galvanised steel rear underrun protection.
- Quarter-shell mudguards in front of the 1st axle and behind each axle, anti-spray flaps behind each axle.
- Spare wheel carrier for 1 spare wheel incl. mounting kit; spare wheel matching the standard tyres, steel rim.
# Axles and Suspension
- SAF disc brake axles, laser-aligned axles and chassis to reduce tyre wear and fuel consumption.
- Air suspension.
- 1st axle automatic lift axle incl. forced lowering and traction assistance, activated by braking 3 times. Traction assistance operates with up to 30% axle load exceedance and max. 25 km/h.
- Lift axle operated below the recommended ride height; no warranty for tyre damage.
# Braking System
- 2-line compressed air braking system, spring-loaded parking brake.
- 2 front fail-safe coupling heads, without connecting lines.
- EBS electronic braking system with front EBS socket, without connecting cable.
- Towing vehicle must ensure ABS functionality!
- Raise/lower valve.
Itedpfxj Ak Npae Afhep
- Ride height with lift axle; raising the lift axle increases loading/overall height by 50 mm (Mega Flex only at low ride or coupling height).
- Vehicle stability system.
# Wheels and Tyres
- 435/50 R19.5 tyres, make selected by manufacturer.
- Steel rims, factory silver.
# Electrical System
- 24 V, multi-chamber lights, yellow LED side lighting.
- 2 white front position lights.
- 2 white/red rear outline marker lights.
- 1 x 15-pin socket at front, without connecting cable.
# Floor
- Approx. 30 mm plywood panels with Omega inserts at cross joints, supported by 8 longitudinal beams for high point loads; forklift axle load up to max. 7,900 kg.
- Premium floor sealing, sealed around the entire perimeter.
- Note: floor deformation due to weather conditions possible!
# Front Bulkhead / Front Corner Posts
- 25 mm aluminium hollow profile, 700 mm high; steel corner posts in volumetric design.
- Crash-Blocker, internal steel impact protection approx. 140 mm high at the bottom.
# Operation / Approval
- Special permit required for gross combination weight exceeding 40 t.
- Exemption required for 9,000 kg axle load. Observe country-specific approval regulations.
- CZ registration, EC type approval according to 2007/46, 24/7 service hotline.
- Prepared for single-line number plate holder, warning board according to ECE 70.
- Reflective contour markings according to ECE R048, white on sides and red at rear.
# Finish
- Frame hot-dip galvanised incl. passivation, landing legs black coated, front corner posts hot-dip galvanised, aluminium front bulkhead.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2006
198 إعلانات عبر الإنترنت
إرسال طلب
هاتف & فاكس
+49 36482... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ












