مقطورة صهريج صوامع

KEMPF Schleusenkipper,Kornschieber,Wände,Lift,Schnecke

Kempf, approx. 58.7 cbm, sliding gate tipper
(Vehicle 621)

First registration: 08/03/2023
Permissible gross vehicle weight (GGV): 36,000 kg
Unladen weight: 7,360 kg
Payload: 28,460 kg
Overall length: 11,850 mm
Overall width: 2,550 mm
Overall height: 4,000 mm
Internal length: approx. 10,500 mm
Internal width: approx. 2,430 mm
Internal height: approx. 2,300 mm
Load volume: approx. 58.7 cbm
Overall height to load edge when loaded: approx. 3,810 mm
Interior lighting on the front wall
Bedps Ahxursfx Acljlp
Front wall sloped at 20 degrees, made of 5 mm thick aluminum, straight rear wall, side walls with approx. 2.5 mm side wall profiles
Floor: 7 mm thick
Air vibrator located at the front, approx. 1/3 of the way along the loading area, at the rear left, in the area of the lamp holders
Operated via a switch
TÜV (technical inspection): 10/2027, emissions test: 04/2027
All components attached to the frame are hot-dip galvanized
Tarpaulin cover, platform
Combination tailgate with hinged tailgate + portal doors. Portal doors 1/3 and 2/3 with viewing window and rubber seal and grain slide
Approx. 400 x 400 mm
1 dust bag
Partition with 3 partitions, sliding backwards and lockable from below left, 6 locking positions for the partitions
Locking position approx. 1/5, 1/4, 3/4, 1/2 and 2/3 of the loading area
Sliding gate trough in the rear wall
3 tarpaulin rods made of aluminum
Hooks for tow bar/tarpaulin
High-performance Kempf 400 bevel gear sliding gate, throughput capacity approx. 30-40 m3/h, 4 conveyor hoses for the sliding gate, approx. 5,000 mm long and 3" TW coupling, 4" cyclone
H2O tank approx. 30 L
2 x LED reversing lights
Fold-up underrun protection
2 x storage box on the driver's side in the middle
1 pair of folding supports
2 x wheel chocks
Load indicator
Storage compartments for hoses, left and right, above the axles over the entire length
1st lift
BPW turntable
ALCOA light alloy rims
Tire pressure monitoring system
Tires 385/65R22.5, 1.) approx. 90/80%, 2.) approx. 60/80%, 3.) approx. 80/80%
PVC half-shell mudguards
2 x LED work lights mounted on the folding supports
Tipping cylinder Penta 190-250 bar
Used sparingly

Price: €67,000.00 (net)

All information is provided without any guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos and prior sale.

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.