أونيموغ U219 مع منصة تحميل منخفضة من الفولاذ الكامل

Mercedes-Benz Unimog U219 mit tiefergesetzter Pritsche

Used Unimog U219 with a low-profile AS-Söder all-steel dump body

Special equipment of the Unimog U219:

B5B Trailer brake, 2-line
C7H Protective device, side
CA4 Mounting brackets, rear
CD6 Fastening parts, between the axles
CP3 Front mounting plate DIN76060, Type B, Size 3
D6F Air conditioning system
DB5 Co-driver's seat, double seat
DG1 Additional steering column switch, left
DH3 Mounting bracket, universal, for control panel
E33 Battery main switch on the battery box
E40 ABS trailer socket 24V, 7-pole / 5-pin
E42 Trailer socket 12V, 13-pole
E45 Front socket 24V, 7-pole
ED2 Continuous power sockets 12V (C3), 12V and 24V, center
ED6 On-board socket 24V/25A in the cab, with C3 signal
EF3 Rearview camera
EM5 Monitor, for camera system
F5L Exterior sun visor, transparent
G22 Auxiliary gearbox with off-road gear
G48 Automatic Shift (EAS)
H55 Hydraulic connector, rear, 4-way, cell 1+2
H58 Pressure line rear, 2nd hydraulic circuit
H59 Separate return line rear
H86 Hydraulic connector couplings ISO 7241-1 A/ISO 5675
HE1 Hydraulics for tilting device
HN6 Hydraulic system, 2-circuit, 3-section, full proportional, snow plow control
J1O Digital tachograph, 2nd generation, ADR
J1S Tachograph manufacturer VDO
J49 Pre-wiring for warning light for telescopic cylinder
J5S Radio, with USB connection and Bluetooth
J9D Pre-wiring for toll collection
L59 Tripod, left and right for rotating beacon
LE4 Work light, cab rear wall, top, LED
LL8 Additional headlights, height-adjustable, A-pillar
N08 Engine PTO including front PTO
N09 PTO speed limitation
Q94 Trailer hitch, large pintle hook, ring, bolt 38.5
RT2 Low-profile rims 11x20
SC4 Warning stripes red/white, retroreflective
VH2 Identification, approval as a tractor unit, Germany
WG3 Weight variant additional 10.0 t (5.2/5.5)

Söder tipper body, type KP219T
Low-profile version
Dimensions: 2,300x2,100x400mm
with subframe
with tilting cylinder
with central locking rear
Steel side walls 400 mm
Front wall 500 mm high
Dump body floor made of Hardox 450
4 lashing points
Söder front wall extension to approx. 800 mm
Lower edge of the cab window

Are you interested?
Please contact us.

Inspection and test drive by prior arrangement.
Used machine, sold as is without any warranty/liability for defects.

Errors and omissions excepted.
Godpfx Agjzumcxjyjuf

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.