مقطورة نصف مفتوحة

FLIEGL 3-Achs Jumbo Auflieger Plateau offen

Please note: The images are archive photos! The vehicle may still be in use!

Weights and Dimensions:
Permissible/technical gross weight: 35,000 / 39,000 kg
Permissible/technical payload approx.: 28,880 / 32,880 kg
Permissible/technical aggregate load: 24,000 / 27,000 kg
Permissible/technical fifth wheel load: 11,000 / 12,000 kg
Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance

Overall length approx.: 13,800 mm
Maximum overall width: 2,550 mm
Godoy Slhqspfx Ai Toub
Overall height approx.: 2,388 mm
Gooseneck length approx.: 4,050 mm
Low bed length approx.: 9,600 mm
Loaded loading height in the low bed approx.: 900 mm
Internal width approx.: 2,480 mm
Coupling height approx.: 950 mm
King pin installation dimension approx.: 1,680 mm
Front corner dimension approx.: 2,040 mm

Chassis Semi-Trailer Forwarder
Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin
Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm
Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps
'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame
24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support
Free landing gear corner dimension and rear swing clearance approx. 1,920 mm
Aluminum side underrun protection
Steel rear underrun protection
Quarter-shell mudguards
9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section).
3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension

Axles & Suspension
Drum brake axles according to manufacturer specification
'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption
Air suspension

Brake System
2-line compressed air braking system
Color-coded lines for easy service
Spring-loaded parking brake
2 error-proof coupling heads at front, without connecting line
EBS, Electronic Braking System with EBS socket at front, without connection cable
Note: The trailer may only be towed by tractors with functional ABS!
With raise & lower valve
Vehicle driving stability system

Wheels and Tires
235/75 R17.5, manufacturer at discretion
Steel rims, factory silver

Electrical System
24V, multi-chamber lights, side-mounted yellow LED lighting (recessed)
2 white position lights at front
2 white/red lane marker lights at rear
2 x 7-pin error-proof sockets at front, without connecting cable
1 additional LED work light at rear, operated via reverse light

Floor
Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg

Front wall / Corner stakes front
25 mm aluminum hollow profile, 1,350 mm high

Country of registration / license plates
Germany
Inspection and certification in Bosnia
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective tape according to ECE R 048, white on sides, red at rear
Warning sign according to ECE - 70

Paintwork
Frame: Hot-dip galvanized including passivation
'15-year warranty against rust-through'
Front corner stakes: Hot-dip galvanized
Front wall: Aluminum

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.