شاحنة صهريج فراغية

MAN BL CH - FFG TGS 26.440 6x2-4 FFG elephant vacu

Chassis
MAN TGS 26.440 6x2-4 BL CH EURO6e

Engine: MAN D2676 LFAZ, 324 kW, 2,250 Nm torque
Transmission: MAN TipMatic 12.26 DD
Wheelbase: 3,900 mm, 1,350 mm between rear axle and trailing axle
MAN Efficient Roll
Trailing axle, non-driven, straight, steerable, liftable
Differential lock on driven rear axle
Leaf/air suspension
Cab: NN, cab suspension basic with mechanically operated tilting roof
Headlights: H7
Daytime running lights: LED
Fog lights, cornering lights: H7
High beam assistant, automatic headlight control
Rotating beacons: 2x LED
Mirror system: MAN OptiView, digital mirror replacement system
Driver's comfort seat, air-sprung, seat heating
Passenger seat, non-sprung
Multi-function steering wheel
Instrument cluster: 12.3 inch
Climate control system: climatronic
Auxiliary heater
Cruise control: ACC Stop & Go
MAN Media System Professional Navigation: 12.3 inch
MAN sound system
Trailer coupling (to be installed)

FFG elephant vacu 13.002 VSK vacuum truck
Vacuum pump: 70 m³/h
High-pressure pump: 18 l/min

Tank
Material thickness: 6 mm
Total volume: 13,000 l
Sludge tank: approx. 11,500 l - Water tank: approx. 1,500 l

Tank emptying
Free discharge from the rear-sloping superstructure
By hydraulic tilting, total tilting angle approx. 20 - 25°
Via manual valve and multi-stage hydraulic cylinder
With pressurization via vacuum pump
Suction/pressure lines routed over the tilting pivot point

Water tank
* Filling
Filling line system in DN 50 with ball shut-off valve
Coupling connection - Storz C
Free-flow device according to drinking water regulations
The overflow of the hydrant filling is led under the vehicle
Pneumatic shut-off valve to prevent splashing during driving
* Emptying
Cleaning/emptying connection DN 50 with shut-off valve and Storz C coupling

Emptying flap
Top-hinged, externally reinforced full door, opening over the entire tank cross-section at the rear
Hydraulically opening upwards, with hydraulic locking.
Manual control valve for opening and closing in the field of vision.

Suction and emptying connection
In the lower and upper part of the emptying flap, each DN 100 with manual ball valve
Sample extraction valve
Coupling V-part Perrot with sealing cap

Sludge tank fill level monitoring
Float indicator with additional rotary encoder for electronic measurement
Placement of the float in the center of the tank for slightly more accurate measurement results when the vehicle is tilted
Digital display in the control panel in 100-liter increments

Vacuum pump
Manufacturer: Gardner Denver Wittig RFW 200
Suction capacity: max: 1,250 m³/h (with free flow)
Drive power: approx. 45 kW
Pipelines in DN 100
Vacuum pump drive from the auxiliary drive via universal joints with belt drive

Suction hose reel
Installed on the tank cover, hydraulically driven with rotary feedthrough
Shut-off slide and rotary feedthrough in DN 100
Designed for 50 meters of suction hose DN 80

High-pressure pump
Manufacturer: Speck, Type P 45 - 75/180 G
Pump output approx. 75 l/min at 180 bar (pressure at the nozzle approx. 150 bar)
Drive power approx. 28 kW
Piping DN 13 including fittings

High-pressure hose reel
Fixed at the rear, hydraulically operated
80 m DN 13
Spray gun lance 500 mm

Control panel integrated in the equipment box
Remote control (small version)
Equipment boxes
Hose tray
Camera at the rear of the vehicle
Hand washing unit with heater
Work lights: LED 5x
1 emergency warning light mounted on the rear of the vehicle
Podpowzpvkefx Achjgr

NOTE:

تمت ترجمة الإعلان تلقائيًا. قد تحدث أخطاء في الترجمة.