مقطورة بهيكل قابل للتبديل
Container Krancontainer 6,5 m, Fassi Kran F135,
مقطورة بهيكل قابل للتبديل
Container Krancontainer 6,5 m, Fassi Kran F135,
سعر ثابت دون ضريبة القيمة المضافة
68.500 €
(81.515 € إجمالي)
سنة الصنع
2025
الحالة
جديد
الموقع
Petershagen 

عرض الصور
عرض الخريطة
البيانات الأساسية
- سنة الصنع:
- 2025
- الحالة:
- جديد
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
68.500 €
(81.515 € إجمالي)
- موقع البائع:
- Auf der Tappenau 15, 32469 Petershagen, ألمانيا

اتصل
تفاصيل فنية
- طول مساحة التحميل:
- 5.500 مم
- عرض مساحة التحميل:
- 2.480 مم
- ارتفاع مساحة التحميل:
- 500 مم
- معدات:
- رافعة
تفاصيل العرض
- معرّف القائمة:
- A184-41-561
- التحديث الأخير:
- في ١٢.٠٨.٢٠٢٥
الوصف
Brand new roll-off container with FASSI loading crane
Roll-off container in flatbed design with aluminum side walls
and permanently mounted Fassi loading crane
FASSI loading crane F135AC.0.24:
* 390° slewing range
* All hydraulic cylinders double-acting
* Hard-chrome-plated piston rods
* Electronic overload cut-off device with FX500
* Emergency stop and visual alarm (90% and 100%)
* Including adjustable digital slew limiter
* FASSI FSC stability control including LMB II
* Pressure relief and load-holding valves
* Control block with 4 control valves, operable from both sides
* 5th and 6th control circuits
* Oil cooler type 60/24
* Extendable on both sides, support width 4.37 m, hydraulic support
* Standard color RAL 3020 traffic red - all cylinders painted black
* Load hooks and mounting clamps (short / 500mm)
* Driving position: folded across the direction of travel
* Dead center above the outrigger beam
* Joystick control for 6 functions
* 1 LED work light
* Outriggers can be operated remotely
* 180° hydraulic Elevating support legs
Roll-off container/crane container
Transport platform
Total length 6,500 mm
Prsdpfx Asvw Hm Hedyoc
- According to DIN 30722 Part 1
- Internal dimensions 5,800 mm (5,300 mm x 2,450 mm)
- Crane plate 1,200 x 1,200 x 25 mm S355
- Pre-installed hook holder Ø50 mm
- 5 mm smooth floor
- U-shaped frames 80 x 50 x 4 mm, 500 mm spacing
- UNP-180 end frame
- Perforated side profile
- Greaseable and replaceable run-off rollers, axles
Ø40 mm
- 25 mm aluminum side walls on the sides and rear
SNAPLOCK system (height 800 mm), split in the middle
- WITHOUT tarpaulin hooks
- KINNEGRIP K20 stanchions (center and rear)
foldable/removable )
- Front wall height 1200mm
- Primed inside and out
- Exterior paint in any RAL color (stock item in RAL 9006 Silver)
- Anodized aluminum profiles
- Initial container inspection according to BGI 5005
The mechanical and hydraulic connection to the truck will be carried out upon request! Additional charge!
We are happy to provide further information.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Roll-off container in flatbed design with aluminum side walls
and permanently mounted Fassi loading crane
FASSI loading crane F135AC.0.24:
* 390° slewing range
* All hydraulic cylinders double-acting
* Hard-chrome-plated piston rods
* Electronic overload cut-off device with FX500
* Emergency stop and visual alarm (90% and 100%)
* Including adjustable digital slew limiter
* FASSI FSC stability control including LMB II
* Pressure relief and load-holding valves
* Control block with 4 control valves, operable from both sides
* 5th and 6th control circuits
* Oil cooler type 60/24
* Extendable on both sides, support width 4.37 m, hydraulic support
* Standard color RAL 3020 traffic red - all cylinders painted black
* Load hooks and mounting clamps (short / 500mm)
* Driving position: folded across the direction of travel
* Dead center above the outrigger beam
* Joystick control for 6 functions
* 1 LED work light
* Outriggers can be operated remotely
* 180° hydraulic Elevating support legs
Roll-off container/crane container
Transport platform
Total length 6,500 mm
Prsdpfx Asvw Hm Hedyoc
- According to DIN 30722 Part 1
- Internal dimensions 5,800 mm (5,300 mm x 2,450 mm)
- Crane plate 1,200 x 1,200 x 25 mm S355
- Pre-installed hook holder Ø50 mm
- 5 mm smooth floor
- U-shaped frames 80 x 50 x 4 mm, 500 mm spacing
- UNP-180 end frame
- Perforated side profile
- Greaseable and replaceable run-off rollers, axles
Ø40 mm
- 25 mm aluminum side walls on the sides and rear
SNAPLOCK system (height 800 mm), split in the middle
- WITHOUT tarpaulin hooks
- KINNEGRIP K20 stanchions (center and rear)
foldable/removable )
- Front wall height 1200mm
- Primed inside and out
- Exterior paint in any RAL color (stock item in RAL 9006 Silver)
- Anodized aluminum profiles
- Initial container inspection according to BGI 5005
The mechanical and hydraulic connection to the truck will be carried out upon request! Additional charge!
We are happy to provide further information.
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مورد
ملاحظة: سجّل مجانًا أو سجّل الدخول، للاطلاع على جميع المعلومات.
مسجل منذ: 2005
تقديم الطلب
الهاتف & فاكس
+49 5704 ... إعلانات
تم حذف إعلانك بنجاح
حدث خطأ


















