مقطورة محملة منخفضةMÜLLER-MITTELTAL
ETÜTAR 14,4 Plateau, LED Runduml. Containerver
مقطورة محملة منخفضة
MÜLLER-MITTELTAL
ETÜTAR 14,4 Plateau, LED Runduml. Containerver
سعر ثابت دون ضريبة القيمة المضافة
26.250 €
(31.238 € أزداد)
سنة الصنع
2025
الحالة
جديد
موقع
Alsdorf 

عرض الصور
عرض الخريطة
البيانات الأساسية
السعر والموقع
سعر ثابت دون ضريبة القيمة المضافة
26.250 €
(31.238 € أزداد)
- موقع البائع:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, ألمانيا
اتصل
تفاصيل تقنية
- الوزن الإجمالي:
- 14.400 كلغ
- الوزن الأقصى للحمولة:
- 10.950 كلغ
- تكوين المحور:
- محورين
- طول مساحة التحميل:
- 6.270 مم
- عرض مساحة التحميل:
- 2.470 مم
- معدات:
- رافعة خلفية, نظام الفرامل المانعة للانغلاق (ABS)
تفاصيل حول العرض
- معرّف القائمة:
- A193-32-331
- الرقم المرجعي:
- 11465
- التحديث الأخير:
- في ١١.٠٦.٢٠٢٥
الوصف
Müller-Mitteltal ETÜ-TA-R 14.4 Tandem ? Low loader ? Flatbed ? Trailer
Available again soon, please pre-order. Equipment changes still possible to a limited extent.
Inquiry no.: 11465 Delivery to your address is possible----
* GVW: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, ABS/EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring
* 6.27m x 2.47m platform with galvanized front wall 400 mm
* Excavator bucket holder made of hardwood screwed to front wall
* Floor height unloaded 930 mm / loaded 870 mm
* One-piece ramps with hot-dip galvanized grating in anti-slip design, can be pushed together to about 20 mm, secured by retaining rods and diagonal supports
* Ramp lifters with vertically standing, adjustable springs for easy one-man operation
Itelhswq Uinjccqneh
* 4 UVV drop lash rings (LC 6300 daN)
* Main frame inside, perforated outside frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of drop lashing rings LC 3000 daN at a distance of approx. 600 mm possible) with close cross-profiling, high-raised front and rear end and rear drive-up slope, hot-dip galvanized.
* 10 UVV lashing rings LC 3000 daN can be recessed in the existing hole grid in the outer frame, additionally
* Further lashing options through holes (Ø 50 mm, LC 1200 daN) in the front and rear end crossbars
* Toolbox in front of the front wall
* Side marker lights with indicator control
* Softwood floor, 50 mm frame hot-dip galvanized
* Height-adjustable landing gear at the front, folding supports at the rear.
* 2 x container locks recessed in the front crossmember
* Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, optionally also with 50 mm eye possible
* 1 removable LED marker light at the rear----
* Leasing, hire purchase, financing, trade-in possible
* For example: 510 Euro at 60 month term without down payment or residual value
* ----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside business hours, we are available by appointment
We speak German, we speak English, mowimy po polsku, on parle francais
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
Available again soon, please pre-order. Equipment changes still possible to a limited extent.
Inquiry no.: 11465 Delivery to your address is possible----
* GVW: 14.4 t, Payload: 10.95 t
* LED lighting system
* GIGANT axles, ABS/EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring
* 6.27m x 2.47m platform with galvanized front wall 400 mm
* Excavator bucket holder made of hardwood screwed to front wall
* Floor height unloaded 930 mm / loaded 870 mm
* One-piece ramps with hot-dip galvanized grating in anti-slip design, can be pushed together to about 20 mm, secured by retaining rods and diagonal supports
* Ramp lifters with vertically standing, adjustable springs for easy one-man operation
Itelhswq Uinjccqneh
* 4 UVV drop lash rings (LC 6300 daN)
* Main frame inside, perforated outside frame (45°-bent with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of drop lashing rings LC 3000 daN at a distance of approx. 600 mm possible) with close cross-profiling, high-raised front and rear end and rear drive-up slope, hot-dip galvanized.
* 10 UVV lashing rings LC 3000 daN can be recessed in the existing hole grid in the outer frame, additionally
* Further lashing options through holes (Ø 50 mm, LC 1200 daN) in the front and rear end crossbars
* Toolbox in front of the front wall
* Side marker lights with indicator control
* Softwood floor, 50 mm frame hot-dip galvanized
* Height-adjustable landing gear at the front, folding supports at the rear.
* 2 x container locks recessed in the front crossmember
* Drawbar with 40 mm towing eye (hot-dip galvanized), height adjustable, optionally also with 50 mm eye possible
* 1 removable LED marker light at the rear----
* Leasing, hire purchase, financing, trade-in possible
* For example: 510 Euro at 60 month term without down payment or residual value
* ----
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside business hours, we are available by appointment
We speak German, we speak English, mowimy po polsku, on parle francais
تمت ترجمة الإعلان تلقائياً، وقد تكون هنالك بعض الأخطاء في الترجمة.
مزود
Kutsch Fahrzeughandelsgesellschaft mbH
جهة الاتصال: السيد Ruben Kutsch
Carl - Zeiss - Straße 26
52477 Alsdorf, ألمانيا
+49 2404 ... تبين
مسجل منذ: 2001
أظهر المزيد
عرض معلومات قانونية إضافية
Kutsch Fahrzeughandelsgesellschaft mbH
Carl - Zeiss - Straße 26
DE - 52477 Alsdorf
Tel. 0049 - 2404 - 94350
Handelsregister: Amtsgericht Aachen
Handelsregisternr.: HRB 5649
Vertretungsberechtigt: Jürgen Kutsch
Carl - Zeiss - Straße 26
DE - 52477 Alsdorf
Tel. 0049 - 2404 - 94350
Handelsregister: Amtsgericht Aachen
Handelsregisternr.: HRB 5649
Vertretungsberechtigt: Jürgen Kutsch
مزيد من المعلومات القانونية مغلقة
تظهر أقل
تقديم الطلب
الهاتف & فاكس
+49 2404 ... تبين
قد تكون مهتمًا أيضًا بهذه الإعلانات.
اعلان مصنف

2.388 km
مقطورة محملة منخفضة
MÜLLER-MITTELTALETÜ-TA-R 21 Plateau 7m, luftgefedert, LED
MÜLLER-MITTELTALETÜ-TA-R 21 Plateau 7m, luftgefedert, LED
اعلان مصنف

2.751 km
مقطورة محملة منخفضة
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
اعلان مصنف

2.752 km
مقطورة مع منصة العمل
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
اعلان مصنف

2.752 km
مقطورة مع منصة العمل
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
اعلان مصنف

2.752 km
مقطورة مع منصة العمل
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
اعلان مصنف

2.751 km
مقطورة محملة منخفضة
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
اعلان مصنف

2.751 km
مقطورة محملة منخفضة
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
MÜLLER-MITTELTAL14,4 to. Plateau, Luft, 3 m. Cont.- Verriegelung
اعلان مصنف

2.483 km
مقطورة محملة منخفضة
Müller MitteltalTe Kompakt 40,0 4 Achs Tiefladeranhänger
Müller MitteltalTe Kompakt 40,0 4 Achs Tiefladeranhänger
اعلان مصنف

2.751 km
مقطورة محملة منخفضة
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
تم حذف إعلانك بنجاح
حدث خطأ